The plumbing market today provides enormous opportunities for choosing products by color, shape, size, and material. There are several types of bathtubs alone, if they are classified only by the material used for their manufacture:
- cast iron;
- steel;
- wooden;
- marble;
- acrylic.
The last option is one of the modern solutions. This product is characterized by a fairly low price, especially when compared with marble or wooden samples. At the same time, it has good performance qualities.
Features of acrylic bathtubs Bas
Rectangular bathtub BAS
The baths have a durable frame and an environmentally friendly acrylic coating made in Europe. Each model is designed with ergonomics in mind - the structural features of the human body are taken into account. Some products are equipped with massage equipment, which can be installed separately for an additional fee. All acrylic products have perfectly smooth side surfaces, which allows them to be placed close to the wall.
Bas bathtubs are divided into 4 main categories:
- rectangular;
- symmetrical;
- asymmetrical;
- standard.
The “Standard” line is designed for apartments of standard construction. “Rectangular” are similar to “standard” in their shape, but differ in size and content. “Symmetrical” ones are based on the shape of an isosceles triangle, “asymmetrical” ones come in both triangular and trapezoidal shapes. These models are designed for installation in larger premises: in modern apartments, private houses with a large bathroom.
Hydromassage function
Basically, a bas acrylic bathtub is equipped with hydromassage and air massage, since the use of acrylic material in the manufacture of bathtubs allows such additional systems to be built into them for greater convenience. Bas acrylic bathtub offers aeromassage using air flows and hydromassage using specially directed water jets.
In addition to the stream of water, air is mixed, which makes the massage more effective and the stronger the air flow, the better. Smooth adjustment ensures a comfortable massage mode.
Experts around the world have long proven the benefits of hydromassage. It has a very good effect on the human nervous system, relieving stress, headaches and back pain, reducing visual tension, relieving irritation, depression and simply delivering a pleasant relaxing state.
An acrylic bas bathtub with hydromassage helps fight cellulite. Already after the first sessions of hydromassage baths, you can feel a decrease in the heaviness in your legs, and fat burning will gradually begin to occur. Hydromassage procedures improve blood circulation, thereby activating the heart.
But the maximum effect from hydromassage can be obtained by frequently changing the power of the massage jet and changing the water temperature. Moreover, the first procedure using the hydromassage function should not exceed 10 minutes.
We should not forget that not everyone is allowed hydromassage treatments. Those who suffer from high blood pressure, who have ever had a heart attack, or who are constantly taking medications aimed at regulating heart activity or blood pressure should consult a doctor before using hydromassage.
Popular models for apartments and country houses
Acrylic bathtub Bas “Cameron”
When choosing a bath, you should take into account the requirements of all family members, as well as the area and condition of the room.
As a rule, shower rooms in apartments have a small area - it will not be possible to install a large asymmetrical corner bathtub, so standard, rectangular or small corner ones are installed. For standard layouts, models with dimensions of 1.6x0.7 m, as well as compact ones of 1.2x0.7, are manufactured. The most inexpensive and popular bathtub of this size is “Cameron”, its cost is approximately 10,000 rubles. The hydromassage set is paid separately.
In private houses, when the room area is sufficient to accommodate a large bathtub, you need to pay attention to the reliability of the floor (especially when installed on the second floor) - if the ceilings are weak, they may not withstand and break when filling the bathtub with water. Otherwise, the choice is limited by the layout, size of the room, and the buyer’s budget. When purchasing a model with hydromassage equipment, for its proper operation, it is necessary to take into account the load on the electrical network and the level of water pressure in the pipes.
The Laguna corner bathtub is popular among BAS clients. This model is designed for large rooms, has dimensions of 1700 x 1100 mm, depth - 44 cm. Equipped with a shelf for bath accessories, a seat, and a headrest. Complete with a massage system the cost is about 40,000 rubles, without it - about 20,000 rubles.
Triton
Products manufactured under the Triton brand are made from high-quality Dutch acrylic material and Austrian plastic. The reinforcement is made using durable fiberglass.
Therefore, Triton bathtubs are reliable and durable. They are not afraid of tests with household products.
It is worth noting that the bathtubs of this brand are not only classic, the assortment includes:
- rectangular hydromassage;
- corner hydromassage;
- baths with shower.
Many consumers are attracted by the availability of Russian brand products. At the same time, the possibility of using various types of massages complements the pleasant experience.
About manufacturers and model range
The production is located in Shchelkovo, Moscow region. Various models are available:
- rectangular;
- corner;
- on legs.
As for sizes, they offer both small 130x70 cm and 120x70 cm (Lu-Lu and Lisa), and larger 189x115 cm and 205x120 cm (Oscar and Atlant). Rectangular samples are several dozen models.
Of course, medium-sized models are more popular. These hot tubs include 4 back jets, 10 air massage jets and 6 whirlpool jets. There is a place for the mixer. The Charlie model is suitable for standard layouts.
If the room is limited in area, then it is better to use Triton corner options. The models are presented in right and left versions relative to the location of the communications supply.
If you need to reduce the linear dimensions of the product, you can use the Troy or Lily models (150x150 cm).
Installation and connection methods
Installed semicircular bathtub
Installation of acrylic products has its own characteristics. The material can easily be damaged by sharp objects, so care must be taken during installation. The light weight of the product requires careful preparation of the installation site. Without basic repair skills and the necessary tools, it is better to hire specialists.
For installation you will need the following materials and tools:
- frame;
- hammer, hammer drill, angle grinder;
- adjustable wrench;
- level;
- construction tape;
- corrugated pipe;
- sealant;
- fasteners.
Before installation, you need to prepare the place: dismantle the old mechanisms, level the floor and walls, carry out finishing work, install a sewer pipe in the right place.
Fixation on a metal frame
Usually supplied complete with a bathtub, but you can order the frame separately. A less reliable method than with brickwork, but much faster and easier to install. The best option for average apartments. Metal guides with holes are connected according to the assembly diagram to each other and to the racks using fasteners. Next, a bathtub is placed on the assembled frame. The joints with the walls are filled with sealant.
On a brick or concrete base
The most reliable method, but the most labor-intensive. This monolithic base will not allow the structure to sag or deform under the weight of water. Brickwork is laid out in accordance with the size of the bathtub, according to the level. The product is placed on top of sealants and attached to the walls using a metal corner. The method is suitable for installing large bathtubs.
On your feet
The easiest, but unreliable option. Without support, the bottom may become deformed. The legs are supplied complete and are fixed with self-tapping screws to the strips on the bottom of the bathtub. The sides are attached to the wall using fastening plates, which are pre-attached to the wall (the bathtub is placed on top).
When using any of the methods, the joints between the side and the wall are sealed, and decorative corners are installed.
The siphon system is connected before the final installation of the bath. Follow the instructions for installing the siphon that come with the kit. The mixer and screen are installed last.
Flaws
Let us highlight the main disadvantages of the material and products in general:
- If low-quality rusty water gets into the bathtub, the stains become very noticeable, and it is not as easy to remove as from metal, since the operating conditions of the product do not allow this.
- Do not drop heavy or sharp objects or pour very hot water - the material is very susceptible to such influences: damage and deformation may occur.
- The service life of the product is not as long as, for example, cast iron or steel.
Next, we will look at the features of products from two brands - Triton and Bass - to determine which bath is better.
Main causes of structural failure
Model “Laguna”
When various objects fall during operation, chips, cracks, scratches, and traces of the chemicals used appear on the inner surface. These defects can be eliminated at home yourself. To do this, you will need a repair kit for acrylic products, which is selected by color. It is best to choose from the store where you purchased the bathtub. Each category has its own type of repair kits.
The repair principle is as follows: the damaged area is cleaned, leveled, and an acrylic layer from the repair kit is applied.
For more serious breakdowns, contact professionals, an official service center. Most BAS bathtubs come with a 10 year warranty. The warranty agreement specifies the types of breakdowns that are subject to free repair at the company's expense.
Customer Reviews
Ivan, Moscow : “We have been using the Laguna bathtub from bas for about 2 years, no complaints. The main criterion when choosing was design; they did not delve into the characteristics. We were not disappointed in the choice - the quality turned out to be good. No special care is required, just wipe occasionally with a sponge and liquid soap. Small abrasions have appeared on the surface, so far unnoticeable, but when they become noticeable, we’ll try to cover them up ourselves.”
Nikolay, Moscow : “I bought an acrylic Laguna bathtub from BAS for a new spacious apartment. For a relatively low price (minimum configuration) we got a pretty good product. There are no complaints about the quality. There is no noise when drawing water, the heat lasts long enough. We recommend this model and manufacturer."
Sergey, Moscow : “When moving to a new studio apartment, we decided to change the standard bathtub; the choice fell on the Vectra corner model from BAS, because it is compact (150x90), beautiful and inexpensive. Allows you to really save space. On the advice of the seller, they placed it on a metal frame - nothing bends or sways. There have been no quality issues yet.”
Benefits of acrylic
Acrylic bathtubs offer several important advantages:
- As already mentioned - accessibility. This is especially true for budget options that are comparable in price to steel products. The only drawback in this case is that you need to additionally purchase a frame for installation.
- Keeps warm perfectly. Indeed, acrylic can compete with cast iron in this aspect. The material allows the water drawn into the bath to remain warm for a long period.
- Pleasant material to the touch. Acrylic is very pleasant to touch: it is quite warm and smooth.
- A fall in such a bathtub is less dangerous, since the impact on the material is not as traumatic as, for example, on metal.
- Easy care. It is necessary to periodically wipe the surface with a regular detergent, but not an aggressive one. After this, the coating must be wiped dry.
