Any mixer for a bathtub with a shower is divided into two types: single lever and axle-type faucet. They differ from each other both in the components that are responsible for mixing and in the control functions.
Among them are models of various types: worm, ceramic, with a thermostat, and in addition - a mixer with a hygienic shower.
Principles and rules for choosing a mixer with shower for the bathroom
- First of all, determine how much you are willing to spend on the purchase. We do not recommend saving money when buying a faucet. Good plumbing equipment is not cheap, and if the price is low, as a rule, such devices fail after a short time.
- Consider the features of your interior. Imagine how harmoniously this or that mixer will fit into the shower. Now there is a wide variety of options on the market - from stylized retro models to minimalist high-tech.
High-tech bathroom faucet - Please note the warranty offered. As a rule, manufacturers guarantee the quality of their products and provide a warranty period.
When purchasing, check for a warranty card in the package.
- When purchasing, pay attention to the weight of the product. A faucet made from good material will weigh more than a low-quality one.
In addition to the listed rules, it is also worth considering a large number of nuances - from the applied coating of the elements to the switching mechanism. Below are the characteristics that you should pay attention to when purchasing.
Find out which kitchen faucet is better to choose, high or low, in a special article on our portal.
Prices for popular faucet models
Faucets
Thermostatic mixers
This new program-controlled product is gradually gaining ground in the plumbing market. Water flows are controlled using a panel with an on/off command and temperature and pressure regulators.
These faucets may be equipped with LCD screens, which require an AC adapter or batteries. There are also models with mechanical regulators in the form of valves and buttons.
Types of shower spout
Bathroom spouts are available in two options. Firstly, it is a long spout. Widely used type. The mechanism looks large, so it is advisable to take into account the area of the room. The average length of the gander is 30 cm; this characteristic assumes using the faucet for the sink and bathtub at the same time, when located close together.
Shower with long spout
The fixing nut is the weak point of the structure of a long spout. The element carries a heavy load; the material used must be of appropriate quality. If the design belongs to the budget line or is made in violation of production technologies, the operating time is reduced due to the accelerated failure of the fixing device.
The second option is a short spout. It has been produced for a short time by Russian manufacturers. The structure is a cast form, not divided by a rotating unit. This engineering solution extends the service life. Installation on the side of the bathroom will take up a small amount of space.
Wall-mounted mixer with shower (short spout)
You should choose the type of spout based on the size of your shower. If you want to save space and use a faucet for both the bathtub and the adjacent sink, you should opt for a long spout. The short type is installed if a static direction of water is the optimal solution for you.
Shower head
They amaze with their diversity. They can be metal or plastic. Metal watering cans are more durable than plastic watering cans. Shower heads often have several operating modes. Using wide shower heads allows you to get a mixer with a rain shower. The watering can be manual, installed on the ceiling or wall.
- Wall-hung toilet with installation: recommendations for selection and installation
Decorative screens for a heating radiator: overview of types of grilles and do-it-yourself installation
Hygienic shower for toilet: types and step-by-step installation guide
Shower switch mechanism
There are five common options in total. They differ in materials, methods of operation, and possible types of malfunctions. The correct choice will prevent rapid failure and complete replacement of the switch.
- suberic. It began to be produced during the Soviet Union, was distributed about 30 years ago, and was distinguished by increased fault tolerance. In some domestic buildings this type of plumbing fixtures has been preserved. The assortment of stores currently does not have models with cork mechanisms, since they are no longer in production. Inside the product there is a brass plug with slots, tightly fitting to the body, turning with a 10 cm long lever;
- button. Easy to use compact mixer. It works by pressing a button that switches the direction of water supply;
Shower head with water switch button
- spool valve It is at the same level of reliability as the cork type. Switching occurs by turning the handle, at the same time the spool moves up and down, then gaskets close the hole at the ends of the switch;
Spool mechanism
- ball. A brass ball drilled at a right angle is responsible for the work. By turning the direction lever, the ball makes a rotation equal to 90 °C, opening the spout or shower hole;
Shower Ball Switch
- cartridge mixer. Installation takes place on single-lever structures. Hot and cold water flows are mixed inside the cartridge. It works due to 3 discs, one of them opens the flow, depending on the direction of the lever.
Prices for shower faucets
Shower mixer
Table. Possible switch malfunctions
| View | Advantages | Flaws | Possible faults |
| Suberic | Durability | Not released | Loose connection of the cork, surface damage to the cork material |
| Button | Low price | Short-lived | Susceptibility to O-ring wear, spring stretch |
| Spool | Reliable | Difficult to find on sale | Worn rubber ring, loose screw fixation |
| Ball | No major repairs required, regular cleaning is sufficient | Sensitivity to large impurities, plaque | Lime or other deposits |
| Cartridge | Durability | Difficulty in replacing a replacement cartridge | Lime deposits |
On a note! When choosing a switch mechanism, take into account the features of possible malfunctions; this will prevent you from costly repairs.
Video - Repair of a ball mixer
Types of crane-axle mixers
Worm
Worm-type, has a rubberized locking collar attached to the rod.
Among the advantages, it is worth noting that this type of axlebox crane is very inexpensive on the market, and at the same time has a high level of reliability of the mechanism.
Disadvantages: in order to achieve the desired level of jet and its temperature, you have to waste a certain amount of water, this prevents you from using it sparingly.
Ceramic
Ceramic has two plates with oblong holes. One is attached to the rod, the second is to the body.
Pros: What people value most about this variation is ease of use. The rod rotates exclusively 180 or 90 degrees. The mechanism has proven itself to be durable and absolutely reliable.
Cons: the main disadvantage of this model is its high sensitivity to hard water, due to which it wears out quickly. When the plates wear out, it is necessary to replace the entire crane axlebox, since repair is impossible.
Varieties of fastening designs: choosing the best
A plumbing system can be installed in a variety of ways. Depending on the intended type of mounting, the appropriate mounting order is selected.
- wall method. When choosing this method, the system can be mounted at a convenient height. Installed using a hidden installation method using two dowels or a suction cup. Installation of the fastening can be done by a person without special skills. When using a suction cup, there is no need to drill the wall, installation time is reduced;
Wall suction cup
The wall mount can be fixed or rotating.
- built-in mixer. As a rule, the system is already installed on the side. Such a market offer solves several buyer problems at once, reducing the cost of additional installation;
Combined plumbing model
- ceiling mount. There are two installation options:
— attached to the ceiling using a special rod included in the kit upon purchase. The rod attached to the ceiling is adjustable, allowing you to change the direction of the water supply. The ceiling mount must be securely drilled to the ceiling;
Type of ceiling rod
— hidden ceiling installation.
Hidden ceiling shower
With a hidden overhead shower, all communications remain out of sight during installation. This method is difficult to implement. If the bathroom is equipped with suspended ceilings, they will need to be removed in order to put the components inside. Installation of a ceiling shower requires special skills and must be installed by a plumber. Cons of a ceiling shower:
- Diagnosis of a failed element is possible only after complete dismantling of the installation;
- high price.
The best shower faucet for an onboard bathtub
Rav-Slezak D472.5P mixer is made of brass. The shower holder with an internal plastic lining ensures quiet operation and the hose quickly returns to the holder using a spring mechanism.
Two color options - chrome and gold, several options for making the faucet handle. The delivery set includes hoses, shower head, and switch. A 6-year warranty is provided.
Characteristics:
- materials – brass alloy;
- 4-hole mount;
- equipment (hoses, shower head, ceramic switch);
- color (chrome, gold).
Pros:
- the ability to select a mixer handle;
- reliable fastening;
- high-quality product packaging;
- individual redistribution of mixer components;
- ease of installation;
- stylish design, beautiful decoration.
Minuses:
- shallow spout depth.
Material and coating: how to choose the best?
When choosing a device, be sure to pay attention to what composition it is made from. The correctly selected material makes the plumbing fixture not only visually attractive, but also extends its service life, saving further costs on repairing the product.
Brass
Brass material is characterized by high strength. Products made from this alloy are in great demand. Having a relatively low cost, they have a number of advantages:
- oxidation resistance;
- increased impact resistance;
- durability.
Brass bathroom faucet
The type of coating on the brass body serves an aesthetic function, since this alloy is not susceptible to corrosion. The choice can be made taking into account the features of the interior. Currently there are 5 types available:
- galvanic;
- bronze;
- silver;
- nickel;
- enamel (refers to a fragile decorative coating, easily damaged).
Bronze
The bronze product attracts a lot of attention in the interior, becoming a key detail of the shower room. When choosing bronze, keep in mind that there are two versions of bronze faucets:
- Surface-coated with bronze. This kit contains a thin layer of metal spraying. Due to this factor, the cost and durability will be lower than in models consisting of expensive raw materials.
- Completely bronze composition. The products are characterized by high cost and are considered premium-level plumbing fixtures.
Bronze faucet with shower, made in retro style
Simulin
China is the main supplier of simulin sanitary ware. The composition is lightweight, is a fragile material, and breaks quickly during operation.
Mixers made of silumin and other light alloys based on beryllium, aluminum, magnesium are short-lived
Plastic
Economical option. Plastic does not corrode and does not oxidize. The main disadvantage of the material is its fragility. The characteristics of plastic cannot withstand high temperatures, and over time it deteriorates.
Plastic bath faucet can't handle too hot water
Ceramics
Ceramic ones are characterized by a long service life and can operate trouble-free from 10 to 15 years. The disadvantages of this product include its high cost and fragility: if hit by a heavy object, it is possible to break off a piece of the installed structure or break it.
Ceramic bathroom faucet: beautiful but fragile material
When choosing a mixer material, pay attention to the price and expected service life of the product. (as a rule, you can determine by the price what material is used. Plumbing fixtures made from simulin will cost much less than plumbing fixtures made from ceramics.)
Types of bathroom faucets
Find out how to repair a single-handle mixer tap, and also read the device and instructions in a special article on our portal.
What types of bathtub faucets are there according to how they are controlled?
Among all the parameters by which mixers are selected, one of the most important is the type of control. The ease of using the mixer largely depends on this (due to established habits and preferences). Some people are used to classic valves as a control mechanism, while others are interested in modern style faucets.
No matter how beautiful and fashionable the mixer you choose is, the main thing in it is convenience and reliability. In addition, it is worth considering its location relative to other elements of the bathroom. Among the many types of bathroom faucets, the following types are distinguished:
Two-valve
Many users still do not recognize any other types of faucets other than two-valve ones. With their help, it is really easy to regulate the temperature by simply turning the valve. Based on the type of mechanism, such mixers are divided into:
- worm;
- ceramic.
The disadvantage of mixers with a worm-type mechanism is the short service life of the rubber gaskets in the faucet box. As a result, a leak appears, which, however, can be easily eliminated by simply replacing the gasket. You can replace consumables in such a faucet without involving a professional plumber. But if you do not want to constantly revive the normal operation of the mixer, then take a closer look at models with a ceramic mechanism.
If you already have a faucet installed, you can determine the type of mechanism by the number of valve turns required to supply water. For ceramic mechanisms, 1/2 a turn is enough, while worm gears require 1.5-2 turns.
Mixers with two valves have undeniable advantages:
- low cost;
- ease of use;
- small dimensions.
These types of bathroom faucets are more used in interiors with a classic or retro style; sometimes they are also popular in country-style bathrooms. The color of the faucet can be any, but the more popular models are black, bronze, gold or white. The mixer's gander can be either rotary or fixed. The housing can be equipped with a shower hose with a watering can or valve for installation in the drain hole of a shower cabin or bathtub. The faucet spout may have a nozzle with an aerator, which sprays the flow of water and thereby reduces its consumption. Two-valve models have a low cost, are quite reliable and fully perform their main task. In addition, they are the easiest to install.
Single lever
Today this is perhaps the most popular type of bathroom faucet. It is famous for its ease of use and long service life (unlike valve ones). The flow force and water temperature are controlled by one lever, which can be made of metal or plastic.
Based on the principle of operation of the built-in mechanism, such faucets are made on a model with a cartridge (usually ceramic) and a ball mechanism. Cartridges combine two streams of water into one, mixing them in a given proportion. Over time, the cartridge may wear out. This is directly related to water quality (solid sediment on the ceramic element creates friction, gradually wearing out the cartridge).
The ball mechanism, as the name implies, has several holes and a cavity in the rotating ball (inside the mixer body) in which the water flows are mixed. If solid particles get between the walls of the housing and the ball itself, the mechanism may jam and the mixer will need to be repaired. Such models can also be equipped with a bottom valve and an aerator.
From the above, we can conclude that single-lever faucets equipped with a ceramic cartridge can last quite a long time without intervention if the water supplied to the faucet is filtered from solid particles. Replacing the cartridge is not difficult, but without ensuring a sufficient level of filtration, this procedure will have to be performed every two years.
The length of the gander of each of the specified types of bathroom faucets can vary from the shortest to the longest, designed for use for a bathtub and sink at the same time.
Single lever faucets are especially popular among interior designers. This is due to the variety of shapes and colors. They are suitable for most styles of room decoration, which cannot be said about models with a valve system for controlling the flow of water, which are mainly applicable in classic or retro styles. The spout of lever faucets is sometimes equipped with LED lighting, which gives them a special charm. Mixers of this type come in completely different sizes. And according to the type of spout they are divided into standard (with one thin stream) and cascade.
Read material on the topic: Plumbing for shower stalls
Elbow
For lever-type mixers, the elbow type is distinguished separately. In such models, the control handle has a special shape, similar to a lever, with the help of which the water flow is regulated. In Soviet times, this type of mixer was used in medical institutions, since it involves minimal hand contact with the surface of the body. Elbow faucets are also popular nowadays, more often in the bathroom.
They can be equipped with a bottom valve. The included aerator allows you to use the mixer with maximum comfort. The main element of such a mixer, as in other varieties, is the cartridge (or ball mechanism). Repairing such faucets (replacing the cartridge or ball mechanism) is not difficult and is not much different from the similar procedure in standard single-lever models.
The maximum level of hygiene of such models puts them on the same level as touch models, while having a significant cost advantage. The spout of such models can be fixed or rotary. The color range, as a rule, comes down to bronze and gold shades, but there are also white options. The shape and dimensions of the case may vary greatly depending on the model. The advantages of elbow models are obvious: excellent functionality and hygiene. The downside is the paucity of colors, which makes these types of bathroom faucets “allies” of only one or two styles in interior design.
Touchless (touch faucet)
The most technologically advanced type of faucets, without a doubt, can be called touch models controlled by a contactless method. Such models have a built-in infrared sensor that is triggered by hands brought close to the gander. The water flow level and temperature are set using a screw “disguised” in the mixer body. The height of technology is shown by models that have an automatic temperature control mode (the mixer reacts to the position of the hands in space).
Based on the sensor response time, such models are divided into types:
- with a fixed time (when the water flows for a specified period of time);
- with unlimited time (water flows as long as your hands are under the mixer handle).
An automatic valve eliminates faucet elements such as valves or levers. As a rule, touchless faucets are quite compact. The infrared sensor can be powered from the mains or from batteries. Like other types of bath and shower faucets, touch models can be equipped with a shower head with a hose, a waterfall spout, a mesh and even a water heater. To reduce water consumption, many models are equipped with an aerator.
Even taking into account the high cost of touch-sensitive faucet models, in the long run such a purchase will justify itself due to its very economical water consumption.
The service life of such faucets is quite long, but in the event of a breakdown, repair work can be expensive. This is due to the complex design of the product, which requires special skills during disassembly and assembly.
The minimum number of protruding elements and laconic appearance allow the use of sensor faucets in various interior solutions. Most often, such models are made in white, gold or bronze. Some models use the function of changing the color of the water (backlight) depending on its temperature. A sensor faucet will most likely be out of place in a classic-style bathroom. These mixers are produced mainly by well-known manufacturers, and therefore have excellent quality characteristics. Among other things, touchless faucets have a very attractive appearance and are incredibly easy to use.
Thermostatic
It is impossible not to mention thermostatic mixers, the operating principle of which is based on the supply of water at a temperature clearly set by the user. In it, as in other types of bathroom faucets, two streams of water are mixed into one and fed into the gander. When the hot or cold water is turned off, the flow will be blocked. This will avoid sudden changes in the temperature of the supplied water. Depending on the model, the temperature level is set by a mechanical switch or using an electronic display.
Such mixers have a rather complex design, which does not prevent them from being one of the most compact. Externally, such models look minimalistic and are decorated mainly in traditional colors. Thermostatic mixers can have a short or medium jib, bottom valve, shower hose, etc. Models with an electric display have a convenient backlight. Sometimes the stream of water is also illuminated, which gives a stunning visual effect. Such faucets are produced in various design versions, which makes them one of the most versatile in interior design.
However, some features of the operation of thermostatic mixers should be taken into account. This type of faucet is not suitable for frequent water outages. In these cases, it is better to combine more standard types of bathroom faucets with instantaneous water heaters.
This heater has a number of advantages: attractive appearance and excellent water heating speed, does not take up much space. Various color solutions allow this device to fit into almost any interior. At the same time, working in auto mode, the water heater eliminates the need to adjust the temperature manually. This option is perfect for those who already have a faucet installed, since the water heater will significantly increase the functionality of the plumbing in the bathroom.
Read material on the topic: Mixer design: we understand the intricacies of the issue
Shower head: which one is more convenient?
The shower head is one of the key functional components of the set. There are several varieties:
- Economical. An aerator is built into the base of the nozzle, saturating the water flows with oxygen. Inside, the base of the shower head is filled with balls that soften the water, removing chlorine from it. Consumption is reduced due to the fact that air flows mix with water passing through the nozzles of the nozzle. Water consumption is reduced to 6-9 l/min. (consumption of a “regular” watering can is from 15 to 20 l/min.). The reduced water supply is invisible to tactile sensations. The design also provides a pressure regulator, which reduces water consumption by up to 30%.
Economical shower head
- A simple watering can. A standard shower head that does not require additional settings other than adjusting the water flow mode. Refers to the budget option. The high variety of produced forms provides a choice of decorative designs to suit every taste. Models available with neon lighting.
- "Tropical Shower" The shower head got its name due to the imitation of a real tropical downpour. The basis of the design is a metal plate with a large number of nozzles, thanks to which a shower effect is achieved. The flow rate for such a device is 50 l/min, so when choosing, it is important to consider whether the water supply at home can handle a heavy load. The downside is that it is difficult to maintain - the nozzles become clogged over time and need to be cleaned (pay attention to the drainage features where the structure is supposed to be placed).
Shower head “Tropical shower”
Prices for bathtub faucets with long spout and shower
Bath mixer with long spout and shower
Where are different types of bathroom faucets installed?
When choosing plumbing fixtures for your bathroom, consider your needs and the layout of the fixtures in the room.
Bathroom plumbing is divided according to its purpose into the following groups:
- universal (which can be used for several nodes);
- for washbasin (sink);
- for Bath;
- for bidet;
- For shower.
Universal faucets are especially popular in small rooms where every centimeter of space is important. The swivel neck allows you to use one faucet for bathtub, sink and shower.
The advantage of this choice is obvious savings (buying one device instead of two or three). In addition, laying the pipeline in the bathroom is simplified.
Of course, the use of such faucets imposes some restrictions on the location of the sink relative to the bathtub (they must be nearby). In this case, there may be some inconvenience in using the sink (for example, when the gander is not long enough to reach the center of the sink).
Models with a rotating jib are less reliable, since the constant rotation of the main elements leads to inevitable leaks.
Most well-known plumbing manufacturers do not produce or have a very limited range of universal faucets, precisely because of their low level of reliability. In their opinion, and it’s hard to argue here, it’s much more practical to purchase faucets separately for each point.
The faucet for the sink is selected based on the type of sink itself. Different models can be equipped with different numbers of holes. For example, to connect a mixer with a lever type of control you need one or two holes on the sink (two are needed in cases where the spout and lever do not have a single body), and for valve type mixers you will need one (when all elements are located in one body) up to three (gander + two valves) holes.
There is another type of bathroom faucet on the market – tabletop. They are designed for bowl sinks that do not have special holes for the mixer (there are some). In this case, the mixer is mounted directly into the countertop. Its distinctive features are a long spout and a high body.
For a more effective placement of the mixer, you can pre-make conclusions for the wall connection. This type of faucet arrangement will look great with exclusive sinks.
Floor-standing faucets look especially interesting in the bathroom interior. They will easily fit into any interior.
For bathtubs, wall-mounted faucets are most often used. They are, as a rule, cheaper than other analogues, and a wide range allows you to choose a copy for every taste.
In large rooms with an island bathtub, floor-standing faucets are sometimes used in the form of a column on which a spout and shower head with a flexible hose are placed.
Read material on the topic: How to choose a bath faucet: 12 tips
Which manufacturer to choose: domestic or foreign?
Nowadays there is a huge variety of plumbing fixtures from different manufacturers on the market. The leading positions in terms of sales are occupied by foreign brands from Germany, Italy, and France. The Russian brand IDDIS is less widespread. In order to avoid overpaying for a brand when choosing a manufacturer, the buyer needs to evaluate in detail the benefits offered by the brand.
Grohe
The German brand has been producing a wide range of products since 1936. The price for the product is higher than the market average, but the quality justifies it. The company's factories are located all over the world. The manufacturer provides a 5-year warranty on the product.
Grohe mixer
Hansgrohe
Subsidiary of Grohe. The second most popular German brand. Produces high quality plumbing fixtures for commercial and public use. Warranty - 5 years.
Roca
Italian company. Offers a wide range from budget to expensive models. Mixers come in a variety of shapes. The products have high quality standards and are produced mainly from brass. Warranty - 10 years.
Mixer Roca Vectra
Hansa
Well-known German brand. It is a more budget-friendly alternative to faucets from Grohe and Hansgrohe brands. The quality of the products offered is high. Warranty period - from 1 year to 3 years.
Bathroom mixer Hansa Stela
Iddis
Domestic trademark. It is one of the most reliable; they have been producing their products since 2004. The products are made from a brass body, which guarantees their long-term trouble-free operation. The price of the models is affordable, 5 years warranty.
Mixer IDDIS Jeals
Advice! If you purchase products from a certain manufacturer on the website, pay attention to whether components for the required system are sold in your city; they may not be available for order on the website.
We recommend choosing a faucet from the above manufacturers. All of the listed companies produce high-quality plumbing fixtures and provide a guarantee on their products.
Therefore, this guide to the important features will help form the basis for an idea of the best plumbing system option that will serve you for a long and enjoyable time.
The best country shower mixer
Vidima Neo BA336AA mixer is designed for wall installation and has an easy installation system.
The body is made of brass, with a chrome plated top. The product is equipped with an aerator and a flat swivel spout. The metal handles are protected from overheating, and there is an indication of the supply of cold and hot water. A ceramic hand switch is used to switch between bath and shower modes. The product is equipped with an aerator, eccentrics, and a swivel spout.
Characteristics:
- type – two-grip;
- wall mounting;
- 2 mounting holes;
- dimensions: depth – 400 mm, width – 17.3 mm, height – 12.8 mm);
- functions (aerator, S-shaped eccentrics, swivel spout);
- equipped with a watering can, hose, wall holder, metal reflectors, sealing gaskets;
- color – silver.
Pros:
- high-quality housing;
- convenient installation;
- functionality, used for shower and bath;
- reliable protection against overheating of the handle.
Minuses:
- no thermostat.
Comparison of models
The comparison table of the above presented models will help you more clearly see the characteristics of the mixers and make your choice.
| Model | Type of installation | Mixer type | Material | Thermostat |
| Lemark Thermo LM7732C | wall | double wishbone | brass | Yes |
| AM.PM Like (F8010000) | wall | single lever | brass | No |
| Grohe Grohtherm 800 (34567000) | wall | double wishbone | brass | Yes |
| KAISER Trio 57122 | wall-mounted, vertical | double wishbone | brass | No |
| RAVAK Chrome CR 025.00 | mortise on board | single lever | brass | No |
| WasserKRAFT Berkel 4811 Thermo | recessed | double wishbone | brass | Yes |
| Bossini Z10201410BOS001 | recessed | single lever | brass | No |
For Bath
Single lever
Grohe Concetto 32211001
pros
- stylish design
- German quality
- smooth ride
- durability
Minuses
- high price
From 7370 ₽
The single-lever mixer from the German manufacturer Grohe is distinguished by its elegant design, reliability and comfort. Durable metal body made of brass covered with shiny chrome. The water pressure and temperature are smoothly regulated by simply turning the thin lever.
OLIVE S SANITARIAS Avila 02410AV
pros
- budget cost
- double layer chrome plating
- 7 years warranty
- swivel spout
Minuses
- no eco mode
From 2025 ₽
When considering the best bathroom faucets, you cannot ignore the products of the Spanish company OLIVEˊS SANITARIAS. Reliable brass body made of HQ Brass alloy and double-layer chrome plating ensure the durability of the product. No wonder the warranty period is 7 years.
Double lever
Bronze de Luxe 10113
pros
- retro style
- quality materials
- surface protection from contamination
- hard eyeliner
Minuses
- complex care
From 10736 ₽
With its sleek lines and thoughtful design, this faucet is perfect for an antique-style bathroom. Anti-vandal coating with a special sanitary varnish repels dirt and simplifies the care of the product.
hansgrohe Metris Classic 31313000
pros
- quality
- durability
- stylish design
- reliable manufacturer
Minuses
- high price
From 16930 ₽
The Metris Classic model is suitable for those who want to choose a high-quality 3-piece mortise bath mixer, thought out to the smallest detail. The product is distinguished by elegantly curved decorative lines, which are based on regular geometric shapes.
Best lists
These models were not included in the overall rating, but they deserve attention as the best in their categories:
- budget price;
- tropical shower;
- with thermostat.
Let's take a closer look at them.
Budget price
Vitra Viva Set A41045EXP is a single-lever model with a short spout, distinguished by its simplicity, low cost and pleasant design. Despite the low price, this device is quite reliable. The material of manufacture is brass, inside there is a ceramic cartridge. Simple vertical installation will not cause unnecessary problems. The hose and shower must be purchased separately. Price: from 2700 to 3000 rubles.
Vitra Viva Set A41045EXP
Rain shower
LEMARK POSEIDON LM4262C is a stylish device made of high-quality brass, thanks to the presence of a rain shower, which will help you enjoy your holiday and relax to the fullest. The mixer is equipped with a shower head, a hand-held hygienic shower head and a swivel spout. The hand shower is easily height adjustable. This is a high-quality model made using current technologies. The price is around 22,800 rubles.
LEMARK POSEIDON LM4262C
With thermostat
Hansgrohe Ecostat Universal (13123000) is the leader in this category. The advantage of this product is that the thermostat can be accurately adjusted and maintains the required temperature well. There is a mechanical filter that prevents the entry of solid impurities. The faucet, made of chrome-plated brass, thanks to the presence of an aerator, releases a stream of water without splashing. Using the valve that regulates the pressure, you can switch to a shower. Copes well with reduced pressure. Price from 15,000 rubles.
Hansgrohe Ecostat Universal (13123000)
For the sink
Single lever
Grohe Eurosmart Cosmopolitan 23327000
pros
- budget cost
- design
- eco mode
- bottom valve
Minuses
- To connect you need a 1/2 adapter
From 4820 ₽
A high-quality basin faucet has a stylish design. The device is made of first-class, corrosion-resistant brass, which guarantees the strength and durability of the product. The shiny chrome surface is easy to clean with a damp cloth. Grohe EcoJoy® technology reduces water consumption by 50%.
WasserKRAFT Isen 2603
pros
- strict appearance
- sensitive lever
- smooth switching
- easy installation
Minuses
- red/blue indicators are hard to see
From 3030 ₽
A convenient, inexpensive faucet for a small sink is distinguished by its original design and reliability. The premium cast brass body with nickel-chrome plating gives the device a solid appearance and ensures durability.
Double lever
IDDIS Copter COPSB00i01
pros
- reliability
- low cost
- easy installation
- high-quality assembly
Minuses
- simple design
From 3390 ₽
The Copter COPSB00i01 model is perfect for a washbasin or kitchen sink. The faucet valves are made in the form of helicopter blades, which gives the product individuality. At the same time, setting the temperature and water pressure remains absolutely safe, and the removable silicone aerator eliminates splashing.
VIDIMA Quadro BA244AA
pros
- swivel spout
- aerator
- budget cost
- ceramic cartridge
Minuses
- flexible liner
From 3670 ₽
A device for mixing and supplying water from the Bulgarian company Vidima is perfect for creating a cozy atmosphere in the bathroom. The perfectly smooth chrome-plated surface of the faucet is resistant to chemical attack and does not attract dirt, so it is easy to care for. The valves rotate 360°, allowing you to precisely adjust the temperature and pressure.
Portion-pressure
GEBERIT HyTouch26 115.721.21.1
pros
- functional
- Swiss quality
- reliable manufacturer
- elegant design
Minuses
- high price
From 17075 ₽
The top batch-pressure mixers include products from the Swiss manufacturer Geberit. The body of the product is made of stainless steel coated with chrome. The possibility of hidden installation allows efficient use of bathroom space. The maximum water flow is 6 liters per minute.
Oras Alessi 8710F
pros
- original design
- switch on by pressing the top surface
- efficiency
Minuses
- high price
From 34794 ₽
The model has an original angular shape. The mixer is turned on by pressing the top surface of the tap. Water is supplied for 6 seconds, after which the flow remains closed for 20 seconds. The economical design is convenient for use in public institutions.
Sensory
Grohe Eurosmart Cosmopolitan E 36325001
pros
- thermostat
- reliable manufacturer
- touch control
- eco mode
Minuses
- high price
From 17681 ₽
Convenient touch faucet from plumbing giant Grohe. To turn on the water supply, just place your hands under the tap. A special filter is provided to purify water from lime and other impurities. Can be controlled from the remote control.
Frap F511-1 (chrome)
pros
- low cost
- runs on mains socket and batteries
- beautiful packaging
- stylish appearance
Minuses
- periodically turns on on its own
From 5200 ₽
The model is a mixer with a short spout, which is made of chrome-plated brass and equipped with a touch-sensitive activation mechanism. Manual adjustment of temperature, pressure and sensitivity is possible. Operates from an electrical network or AA batteries.
