14 Best Screwdriver Sets

The best cordless screwdrivers

Screwdrivers of this type are considered one of the most effective and convenient of their kind. The operator can save himself from prolonged mechanical stress and use a screwdriver, which functions independently due to the built-in battery. Before choosing such options, you need to pay attention to parameters that take into account torque and landing rigidity.

AEG SE 3.6 LI 413165 - an ideal solution for assembly work

The most reliable and effective option that will serve in any situation during the assembly and disassembly of furniture. A special distinguishing feature is the compactness of the body. The battery capacity is 1.5 Ah, which is generally enough for 30-40 minutes of continuous operation. The weight of the tool is only 2 kg. The front of the body is equipped with a stiffness adjuster, which is useful when curling the pen. The system is equipped with a reverse function, making the tool convenient during disassembly work.

AEG SE 3.6 LI 413165

Advantages:

• Economical energy consumption, due to which the screwdriver operates for half an hour;
• The gearbox is surrounded by a metal casing;
• Small design dimensions, making the tool effective in narrow areas;
• Quick energy replenishment - 30 minutes;
• Torque is 6.5 Nm;
• Support reverse function;
• The charging unit is removable; quick replacement is possible after wear;
• Convenient suitcase;
• Availability of two speeds.

Flaws:

• The high cost of a screwdriver - from 4000 rubles;
• Small amount of rubber layer on the handle;
• Rapid heating of the device.

SPEC-BAO 3.6LI - version with a rotating body

This tool is the best option among cordless screwdrivers, since its design is capable of changing its shape and penetrating into all hard-to-reach places. The position is changed by a special button located on the bottom of the case.

The device is equipped with a convenient start button that functions in both positions. The front side of the case is made of metal. The protective element is a small cord that insures the instrument from falling.

SPEC-BAO 3.6LI

Advantages:

• Low cost of the product - from 1000 rubles;
• There is LED lighting on the body;
• Light weight of the tool - 0.9 kg;
• Availability of 4 bits in the package;
• The set is equipped with two additional drills;
• Small design dimensions;
• High speed - 180 rpm;
• Battery capacity - 1.3 Ah.

Flaws:

• Non-removable battery type;
• There is no speed controller;
• Low torque - 2.5 Nm;
• Only one speed mode;
• Sales are made in metal boxes.

Tips for choosing a screwdriver set

Before you start choosing a screwdriver, you need to decide on the upcoming tasks. By purpose, such a tool is divided into three categories:

1. Power. These are screwdrivers with thick steel rods and a strength of 54-61 HRC, which are suitable for assembling/disassembling parts with fasteners 60-120 mm long or rusty hardware.
2. For electricians. In this category, the emphasis is more on protection from electric shock, so not only the handle, but also the tip itself is insulated. But in terms of the size of the fasteners, they are suitable for smaller elements with a length of 10-30 mm.
3. For repairing watches and mobile phones. These are small screwdrivers with thin blades for disassembling watch cases and gadgets. A special feature of such devices is a separately rotating rear part, which serves as a stop. But they won’t work with fasteners longer than 5 mm.

On sale there are both separate sets for each type of activity, as well as mixed ones, which will be useful in a watch workshop and on a construction site at the same time.

Now that you understand what screwdrivers you will need, let's move on to tips for choosing. When selecting a kit, it is worth considering the following characteristics:

1. Variety of spline types.

   There are a total of 28 tip options, which are selected depending on the shape of the slots on the screw head. The most common are flat splines, called SL in the international designation. They are used mainly in construction. Curly screwdrivers are designated PH and are useful both in assembling furniture and in car repairs. There is a double cross PZ, used to create cabinet furniture. Hexagons and sprockets (T, Tx, Hx) can be in the gas lift mechanism of office chairs, under the hood of a car, in the housing of household appliances. Think about what kind of fasteners you will be working with and look for a set that meets those needs.

2. Screwdriver length.

   The working part is available in lengths of 25, 38, 50, 75, 80, 100, 150, 175, 200 and 250 mm. Long screwdrivers are convenient for reaching fasteners at height or through mounting holes. The short ones can be used where there is only 50-100 cm of free space above the screw.

3. Handle type.

   We recommend holding the screwdriver in your hands before purchasing to evaluate how comfortable it is to grip and twist. In addition to ergonomics, pay attention to the dielectric coating, which can be only on the handle or on the entire rod too. A pen with an indicator will help you find the phase and zero in the socket. The built-in torque meter will tell you how hard to tighten the fasteners so that it is in accordance with the instructions for the specific device.

4. Availability of a universal screwdriver.

   The kit includes separate handles into which the bits are inserted. This reduces the size of the set and its cost, but during operation you will have to regularly rearrange the nozzles.

5. Additional accessories.

   Some manufacturers include extensions (flexible or rigid) in kits that allow you to increase the working part of the screwdriver and reach the screw head in an inconvenient place. This device does not require a second screwdriver, but helps you use what you have more efficiently. The set with stand is convenient to use on the table to easily find the necessary tool and keep everything in order.

   Read also:  Description of insulation resistance measurements using a megohmmeter
6. Case or tray.

   Some sets are sold with a suitcase, making frequent travel easier. This is the best option for mobile repair teams and frequent changes of workplace. Sets of screwdrivers on a cradle are laid out in order and are suitable for use on a table or cart, which is important for a workshop or production department.

The best dielectric screwdrivers

Dielectric screwdrivers are an ideal tool designed for working with electrical components. The bottom line is that such equipment is equipped with a special insulation layer that protects the master from accidental electric shock. It is noteworthy that the insulating layer is applied not only to the handle, but also to the working rod. When choosing screwdrivers of this type, you need to pay attention to the length and material of the tool.

Enkor 19697 - excellent value for money

This model can be considered the best option among dielectric screwdrivers, which is suitable for home use, since its cost is only 100 rubles.

Chrome-vanadium steel was used as the material for the base of the tool, thanks to which the rod can easily withstand heavy loads and withstand the corrosive effect. The manufacturer focused on the working handle, the base of which is made in a convex shape. This makes the tool much more comfortable to hold in your hand while working.

Encore 19697

Advantages:

• The tool is completely covered with an insulating layer;
• Voltage tolerance limit up to 1000 V;
• The tip of the rod is magnetized, which simplifies the work process in narrow areas;
• The splines are large in shape;
• Philips PH tips are installed;
• Long rod length - 125 mm;
• Light product weight - 120 grams;
• The instrument has a bright and memorable appearance;
• The end of the screwdriver is equipped with a hole for mounting on the wall.

Flaws:

• The handle does not withstand strong impacts;
• Small stop between the rod and the handle.

SHTOK 1000B 09206 - increased strength of the rod and nozzle

One of the best options, designed for fastening mortise elements into particularly hard surfaces. This result is due to the special hardening of the shank - 58 HRS. An additional advantage is the presence of a dielectric layer on the rod and handle. The screwdriver can withstand voltages up to 1000 V.

A useful solution was to apply a grooved surface to the top layer of the handle. Thanks to this, the tool is more firmly fixed in the hand.

SHTOK 1000B 09206

Advantages:

• The universal type of screwdriver is suitable for all types of work;
• Relatively low cost - from 140 rubles;
• The end of the tool is equipped with an additional hole for fastening a safety cord;
• The material was chrome vanadium steel;
• Magnetized tip;
• Small dimensions and light weight;
• Comfortable and ergonomic handle;
• The presence of control edges on the intermediate ring, which correct the accuracy of rotation.

Flaws:

• Does not withstand shock loads.

Handle and rod

The handle of a dielectric screwdriver can be called the most important element, since it is responsible for the safety of the worker.

The properties of the handle should ensure that there is no “piercing” when the rod comes into contact with live parts.

Plastic is usually used as a material, but the surface of the handle must also be treated with a special substance - polyformaldehyde.

• 
  How to choose a phase meter - review, purpose, principle of operation, scope of application + instructions for use with photos

• How to make a transformer with your own hands - step-by-step instructions, diagram, drawings, list of materials + photo of a finished homemade transformer

• Which hidden wiring detector is better? TOP 10 best manufacturers with photos and descriptions

The properties of polyformaldehyde are as follows:

• increased wear resistance and moisture resistance;
• resistance to mechanical damage;
• resistance to solvents and alkalis;
• complete non-conductivity of electric current.

Screwdriver handles can have a round, square, pentagonal or hexagonal cross-section. Triangular options are less common. The main criterion here is convenience.

The rod must also have dielectric properties. If you carefully study the photo of dielectric screwdrivers, it will become clear that the bulk of the tool rods have a cylindrical (standard) shape.

But there are also faceted models. The protective layer is also made using polyformaldehyde; only the screwdriver blade is not covered with it.

Best Impact Screwdrivers

This equipment is ideal for rough and heavy work. Such screwdrivers are used to dismantle old structures and connections in which the fastening units have become corroded.

The base of the tool is equipped with a direct connection to a durable striker, which can be struck with a hammer to increase the force on the fastener. When choosing such a screwdriver, you should pay attention to the strength of the rod and the quality of the coin.

Jonnesway SL D70S5100 - the tool is turned with a key

The best option among impact screwdrivers is Jonnesway, which can withstand enormous loads during operation and has a special faceted attachment designed for tightening with an open-end wrench. The presence of this element greatly facilitates working with the tool.

The working handle is covered with a thick rubber layer, which has wide protrusions.

Jonnesway SL D70S5100

Advantages:

• Comfortable rubber handle;
• Long rod - 100 mm;
• Quite light weight (100 grams), allowing you to easily move the tool;
• The screwdriver can withstand enormous loads during operation;
• Has a long service life;
• In rare cases it is used as a chisel;
• Availability of attachments for an open-end wrench;
• Wear-resistant rod material.

Flaws:

• High cost - 300 rubles;
• No magnetized nozzle;
• Will not change in the electrical field;
• Can only be used with flat self-tapping screws.

The best impact screwdriver models

This category consists of durable and powerful impact-resistant tools that can withstand the pressure of a hammer blow. The process generates a large unscrewing force.

King Tony 4108FR

Average price of goods: 2150 rub.

Advantages:

• branded case for storage and transportation;
• time-tested manufacturer;
• Excellent value for money and quality;
• possibility of using straight and cross-shaped nozzles;
• wear resistance.

Flaws:

• not identified.

This impact driver comes with 2 slots and 6 replacement bits. Used for work in hard-to-reach places where you have to work with clamps and apply shock loads. The popular model is characterized by high build quality and increased service life. Has compact dimensions. The total weight of the case is 1.04 kg.

Licota ABD-73003

Average price of goods: 1800 rub.

Advantages:

• increased resistance to increased loads;
• High-strength steel is used for the manufacture of auxiliary components;
• ergonomic handle;
• withstands significant hammer blows;
• branded case;
• Excellent value for money and quality.

Flaws:

• not identified.

The kit consists of a convenient case, which can be used for subsequent transportation and storage of auxiliary accessories. In addition to the impact type design, the kit includes 4 PH profiles, 2 SL profiles and 6 different bits. The handle is made of metal alloy. The tool is designed to work in hard-to-reach places where some force is required during the twisting process. The device copes well with soured and rusty metal car nuts. The set includes bits of the following types: PH3, SL10, SL8 and PH2.

Jonnesway SL D70S5100

Average price of goods: 500 rub.

Advantages:

• increased wear resistance;
• can be used as a chisel;
• resistance to significant loads;
• length 10 cm;
• branded open-end wrench attachments;
• service life;
• light weight;
• rubberized handle coating.

Flaws:

• work only with flat screws;
• There are no magnetic attachments.

This model is one of the best shock designs presented on the domestic market. Among other characteristics, it is worth noting the colossal resistance to significant loads during operation. This indicator was achieved due to the presence of a special faceted nozzle, to tighten which you will need an open-end wrench. Characterized by increased ease of use. The handle is equipped with a rubberized coating. There are wide protrusions responsible for safe operation.

The best reversible screwdrivers

Screwdrivers of this type are usually used in the field of dismantling work, which often involves complex structures. Instead of carrying a large number of different screwdrivers, it is best to have one reversible one with a set of bits. When choosing such a tool, you should monitor the quality of the removable units and the length of the main element.

VIRA 302012 - 6 attachments included in the set

This tool was included in the rating because it is excellent for dismantling and installation work due to the large number of attachments and relatively low cost. The bits are designed for rotating straight and shaped self-tapping screws.

The end of the tool has a spherical shape, which makes the master’s work much easier. Also notable is the wide handle of the screwdriver.

VIRA 302012

Advantages:

• The tool has a ratchet mechanism;
• Supports three types of splines - PH, SL, PZ;
• The rod is made of chrome vanadium steel;
• Relatively light weight - 200 grams;
• Durable and wear-resistant design;
• The presence of a rigid ratcheting mechanism;
• Has a rubber layer on the handle;
• Allows for quick disassembly of structures.

Flaws:

• Large tool size;
• No magnetized attachments;
• Not suitable for voltage applications.

The best screwdrivers for precision work

The main use of such a tool is the assembly and disassembly of small components and parts. Basically, screwdrivers of this type are characterized by their small dimensions, high strength of bits, a large number of bits and high cost. When choosing screwdrivers for precision work, first of all, you need to look at the quality of the tip.

Xiaomi Mijia Wiha Screwdriver set 24-in-1 – an indispensable option for high-precision work

This screwdriver is distinguished by the presence of a huge set of attachments, consisting of 24 units. This set is ideal for precision work in any conditions, both for beginners and professionals. All components of the screwdriver are sharpened at the highest level, the bits fit into the groove without play. The tool, along with all the attachments, is perfectly located in an ergonomic case, the material for which is anodized aluminum, and the top layer is covered with an anti-corrosion layer. As for the instrument itself, it is made according to European standards and has comfortable edges that make it easy to hold in your hands. Ease and ease of use is ensured by the long, durable rod of the equipment. The back of the screwdriver is equipped with a cap under which the bits are located. It can be easily unscrewed with a finger. All bits have a magnetized structure and are rigidly fixed in the grooves.

Xiaomi Mijia Wiha Screwdriver set 24-in-1

Advantages:

• High quality tool;
• Huge set of attachments;
• Convenient and ergonomic case;
• High rod strength;
• Easy to use;
• Availability of a compartment for attachments.

Flaws:

• The high cost of the tool is at least 1000 rubles.