How much does an acrylic bathtub weigh and what weight can it withstand?

Today, plumbing equipment made of acrylic is very popular in the Russian market. An acrylic bathtub is no exception, characterized by the fact that it retains heat for a long time (thus, the liquid in the bathtub cools down very slowly) and can withstand heavy objects without unnecessary damage to the surface; this is the durability, reliability and ease of use of acrylic bathtubs. Although acrylic bathtubs are very popular among Russian citizens, few people know what maximum weight such a bathtub can withstand. As experts note, it is this factor that affects the service life of all plumbing equipment, no matter what material it is made of.

There is an old myth that acrylic bathtubs are too fragile and buying them is a waste of time and money. This is why many people do not purchase plumbing fixtures made from polymer materials. In practice, it is clear that acrylic bathtubs are characterized by high strength and durability. To find out what maximum weight an acrylic bathtub can withstand, you need to study the distinctive features of the production of this sanitary equipment.

Composition of acrylic bathtub material

There are 2 types of plumbing fixtures, differing from each other in what is the main material:

1. Acrylic. Sheet blanks are produced by casting.
2. ABS plastic. Acrylic serves only as a coating. Blank sheets are produced by extrusion.

Products made from pure acrylic are strong and durable, lasting 7 years or more. The wall thickness is 4-5 mm, in some models it reaches 25 mm.

A bathtub made of ABS plastic is cheaper, but its service life does not exceed 4 years.

Low strength and wear resistance are due to:

• properties of the base material;
• features of extrusion technology;
• small wall thickness (3 mm).

The water in such a product cools faster. It is recommended to insulate it by covering the outside with construction foam (the surface should be pre-moistened).

Both types of bowls are reinforced with fiberglass and installed on metal legs or in a frame.

Advertising equipment for Vanish video

The result of our work was a tank made in the form of a large half-cylinder with a width of 0.75 m and an arc radius of 0.375 m. The height of the tank was 600 millimeters. The product is made of PLEXIGLAS acrylic. Sheet thickness – 12 millimeters. The cylindrical surface is formed by high-precision bending of acrylic. This technology allows you to obtain a perfectly smooth cylindrical surface without defects and thickness differences.

The half-cylinder is mounted on a rectangular base made of the same acrylic sheet. In this way, maximum stability of the structure was ensured. The components of the tank were glued together with a special glue, which made it possible to obtain reliable sealed seams.

What determines the mass of a bathtub?

The following parameters are relevant:

• material;
• wall thickness;
• dimensions;
• form;
• availability of hydromassage and other additional equipment.

Acrylic bathtubs are available in a wide variety. There are products of standard shape, round, multifaceted, asymmetrical and angular.

All other things being equal, they are much lighter than their steel and cast iron counterparts.

Reviews

• Andrey, 35 years old: “We have been wanting to install an acrylic bathtub for a long time. The reason for this success lies in the different shades and shapes. When we started the renovation, I purchased an acrylic bathtub. Its main advantage for me remains ease of installation, since it is very light in weight. The only negative that I noticed is that it is difficult to care for, because here you need to use a soft cloth and liquid compounds.”
• Irina, 23 years old: “We have had an acrylic bathtub for 3 years. So far it looks great, its surface does not contain any scratches or other damage. I take care of her using a special gel-like substance. Thanks to the wide selection of shades, choosing such a product is very simple and will perfectly match the interior of your bathroom.”
• Tatyana, 46 years old: “I have a two-story house, so when arranging the bathroom, I used a cast-iron bathtub on one floor, and decided to install an acrylic one on the second. According to my feelings, I like acrylic better. It has an attractive appearance, scratches on its surface are very easy to remove, and the installation process is very easy. A cast-iron bathtub also has many advantages, but the range of products presented is not very rich, which cannot be said about acrylic products.”

An acrylic bathtub is a very popular bathroom accessory today. It is very often used when arranging a restroom. The reason for this popularity is associated with a huge number of advantages, which include lightness, ease of installation and a wide variety of shapes and shades. And this article will tell you which is the best water filter for washing.

Weight of the bathtub with and without hydromassage

Weight of products made from pure acrylic of various brands, kg:

1. 1MarKa Viola and Alpen Mars, 150x70 cm - 15-20. Standard rectangular shape.
2. Cersanit Sicilia, 1.4x1 m - 20. Shortened model for a small bathroom.
3. Jika Clavis, 1.7x0.7 m - 25.
4. Santek Cannes, 1.5x1.5 m - 34. Luxury model: depth 0.47 (m). Designed for 360 l. There is a front panel.

With equal dimensions, baths can differ significantly in weight. Thus, a high-quality and durable Aquanet Extra bowl with dimensions of 170x70 cm weighs 17 kg. Its wall has a thickness of 4 mm, while that of Jika Clavis is 5 mm.

In the presence of hydro or aqua massage, the weight of the product increases by 1.5-2 times. For example, the weight of the 450 liter Triton Oscar model is half a centner.

Tips for choosing a plastic bathtub

Concluding the topic under consideration, I would like to talk about the details that can be used when choosing a high-quality plastic structure so that it lasts for a long time. When choosing a plastic bathtub, pay attention to the following:

1. Surface evenness . A high-quality container should not have any irregularities or bumps. It should be uniform and smooth with uniform coloring.
2. The plastic must have a thickness of at least 5-6 mm , which can be seen in the cut in the area of ​​the sides.
3. The cross-section shows layers of different materials used in the production of the container, so it would be better if there were more layers.
4. Capacity parameters . You need to select the dimensions of the bathtub that will be convenient to use. The optimal depth of the bath will be 50-60 cm, and the installation side height will be 60-70 cm. Of course, the lower the sides are, the easier it will be to immerse yourself in the bath.

Original plastic bathtub translucent

You should also remember about the quality of the plastic construction, which will depend on the manufacturer. Today, the leading companies in the production of plastic bathtubs are occupied by RIHO, RAVAK, BACH, ALPEN, RADOMIR, TEIKO, BAS and AEGO. There are also other manufacturing companies on the market that produce plastic bathtubs of slightly lower quality. In principle, in this matter one should refer to the opinions of users who have experienced the reliability of plastic products. You should also look into the price ranges of plastic bathtubs, as the starting price is around $300.

Plastic baths

Plastic bathtubs for the bathroom

Bathtubs made of plastic

Bathtubs made of plastic

Children's plastic baths

Plastic bathtub Original plastic bathtub translucent

Bathtub made of plastic

What does the weight of an acrylic bathtub affect?

The indicator characterizes the strength and durability of the product. If out of 2 models with the same shape and dimensions, one weighs more, it means that its wall is thicker. It deforms less, has good wear resistance and will last longer.

A high-quality product without additional equipment has a mass, kg, with a length:

• 1.5 m - 15-20;
• 1.7 m - 20-25.

Ease of delivery and installation also depends on how much the acrylic bathtub weighs. A relatively light product can be moved by 1 person; an assistant will be required to install a heavier one.

Weight does not affect stability. The bowl is screwed to the wall, which eliminates the possibility of tipping over.

Thickness

What thickness should acrylic bathtubs have? Here everything completely depends on the characteristics of production: cheap, but high-quality models have a total wall thickness of 6 mm, and more expensive ones - up to 15 mm (and the acrylic layer in this case is about 8 mm). It consists of two parameters: the thickness of the reinforcing layer and the thickness of the acrylic. As we determined above, the service life of the product depends on the size of the acrylic layer and it is this that you should pay special attention to.

You can check the thickness of the product using a flashlight:

1. Place the switched-on flashlight against the wall of the bathtub.
2. Look at the product from the opposite side.
3. If the light from the flashlight shines through on the other side of the plumbing, it means that the acrylic layer is not sufficient or the production technology was not followed during the manufacture of the bathtub.

How much weight can an acrylic bathtub support?

The indicator depends on the following parameters:

• mechanical characteristics of the material;
• heat resistance;
• side thickness;
• number of supports in the frame;
• forms.

A bowl made of pure acrylic with a wall of 4 mm or more can withstand a weight of up to 0.5 tons.

Examples:

1. Triton “Scarlet” 1.67 m long - 0.45 t. The product has an asymmetrical configuration.
2. Triton “Standard”, 1.7 m - 0.5 t. Rectangular bathtub.
3. "Agatha", 1.75 m - 0.5 t. Standard rectangular bowl.
4. Aquanet Palau, 1.4 m - 0.6 t. Corner model, equipped with hydromassage, designed for 440 l.
5. Akrilan Laguna Vitel, 1.4 m - 0.5 t. Corner bath with hydro and air massage (side and back) with a capacity of 350 l.
6. Aquanet West, 1.5 m - 0.45 t. Rectangular bowl, the bottom of which is reinforced with an additional insert.

From the given data it is clear that a high-quality bathtub, when filled, can support a user weighing up to 150 kg.

The most durable corner option. Large bowls with a wall thickness of 25 mm can hold 5-6 people when filled.

The maximum load for products made of ABS plastic is 10-20% less.

The low strength of the bowl is indicated by:

1. Deflection of the wall when pressed by hand.
2. The frame is significantly reinforced compared to similar models. A good bathtub, depending on its size, requires no more than 6-12 supports.
3. Strong chemical smell. High-quality acrylic has a slight odor.
4. Transparency of the walls when viewed through a flashlight.

The bath can withstand the specified load provided that the water temperature does not exceed the maximum permissible for this type of polymer. This parameter is also indicated in the instructions. For high-quality acrylic and ABS plastic it is +70…+80°C. If the bowl is filled with hotter water, its strength characteristics will decrease and it may become deformed. In order for the plumbing fixtures to serve for a long time, it is recommended not to exceed the temperature threshold of +60°C.

Any acrylic bathtub, regardless of the maximum permissible weight, requires careful handling. It is not recommended to sit on the side and stand on your heel in the cup, especially for overweight users. You should also avoid dropping heavy objects into the bowl.

What sizes and shapes are there?

It is worth noting right away that acrylic is a plastic material. Thanks to this, products made from it have completely different geometries and, accordingly, sizes. Let's look at the main forms of acrylic bathtubs below.

Corner asymmetrical . This is an ideal option for a spacious room. They can be installed on both the left and right sides. Main sizes: 20x70, 120x90, 150x90, 150x70, 170x110, 170x90, 170x100, 170x70, 160x100, 140x90, 140x100, 120x120, 130x70, 130x130, 110 x110, 170x100, 90x90, 100x100, 120x120, 160x90, 140x140, 150x150, 160x160, 170x170 , 150x75, 150x80 and 180x100 cm.

Rectangular . Such models fit harmoniously into classic interiors and small rectangular or square rooms. Standard dimensions: 140x60, 150x60, 160x60, 180x60, 190x60, 140x70, 150x70, 160x70, 180x70, 190x70, 140x80, 150x80, 160x80, 180x80, 190x80.

Round . This plumbing fixture is often found in luxury private homes, where the area of ​​the room is large and allows you to “expand”. A round bathtub can be installed in the middle of the room on legs or made recessed into the floor. And if the model is deep enough (90 - 100 cm), you will get a small pool.

For comfortable water procedures, plumbing fixtures are often equipped with hydromassage and other options. The sizes of round products vary from 120 cm (mini fonts) to 300 cm (large hydro pools).

complete information
about the variety of forms in our special article .

Features of choice

When choosing the dimensions and shape of plumbing fixtures, it is worth taking into account personal wishes and preferences, the size of the room, as well as the anthropometric data of each family member (height and weight). For example, if you are buying a bathtub for an elderly person, you should pay attention to low or seated models with handles. For small rooms, classic straight fonts are chosen. And if san. the unit is very small and cramped, it is worth buying plumbing fixtures of minimum length - 100 - 120 cm.

Of course, in a small bathtub you will not be able to completely relax and lie in hot water after a hard day at work. But it will help free up a few extra centimeters in the room, make it more practical and contribute to a comfortable shower. If the size of the bathroom allows it, then you should pay attention to asymmetrical, corner or round models. They look quite stylish and original.

When choosing plumbing fixtures, you should definitely pay attention to such aspects as the height and build of the apartment owners. If you take a product that is too small for a large person, then swimming in it will be uncomfortable. The photo above shows the position of the average person in different sized hot tubs. To correctly determine the dimensions of plumbing fixtures, you must consider the following:

• height with legs from the floor of 65 - 70 cm is standard and allows you to easily climb into the bowl;
• depth 45-60 cm is suitable for both children and adults;
• The length of the plumbing fixtures from 160 to 180 cm allows a person of average build to take water procedures comfortably. In such a bath you can calmly stretch out your legs and rest your head on the side;
• As for the width , it is always chosen individually. But the standard width is 65 - 70 cm .

Along with the bathtub, you should immediately purchase an acrylic screen to match the size. It will hide the free space under the plumbing and give the room a neat appearance. Read in detail about how to install it correctly in our article .

Ways to strengthen an acrylic bathtub

A bowl with thin walls is installed in the frame. There are 2 options.

Factory frame frame

It is made by the manufacturer from a steel square pipe with an anti-corrosion coating and is supplied complete with a bowl.

Installed in the following order:

1. The bathtub is turned over and markings are applied on the outside of the bottom and walls for holes for fasteners, if they were not drilled by the manufacturer. The points are placed on thickenings specially designed for this purpose (mounting platforms).

2. Make holes with a depth of no more than 6 mm. It is recommended to wrap electrical tape around the drill as a guide, leaving the specified distance from the cutting edge.
3. Screw the frame elements using the fasteners provided by the manufacturer or completely similar ones. Self-tapping screws with other parameters may cause cracks in the product. Screwing is done by hand.
4. Install drain fittings and fill the cracks with sealant.
5. Turn the bath over and put it in place.
6. By rotating the frame leg, raise the corner of the bowl to the required height.
7. Based on the building level, other supports are adjusted. The side should take a horizontal position.
8. Screw the hooks from the kit to the wall.
9. They hang a bowl on them. Without this, the lightweight structure may tip over when trying to sit on the side.
10. Connect the sewer.
11. Fill the product with water to check the tightness of the connections.
12. Install a decorative apron. It comes included.

Instead of an apron, you can build a screen from plywood and cover it with ceramic tiles.

Install on a homemade frame

You can make the frame yourself from the following materials:

• timber;
• rolled metal;
• bricks

The first option is the simplest, since the wood is easy to process and allows you to get by with common tools. Before assembly, it is impregnated with antiseptics and painted.

The metal frame is more durable, but more expensive. Assembly will require welding equipment.

The brick frame allows you to do without screwing the bowl to the wall. The master is required to have skills in masonry work. On the side of the communications supply, a gap of several bricks is left.

The design of the homemade frame should provide the gap between the floor and the bottom of the bowl necessary for installing the siphon.

Characteristics affecting service life

The bath comes with support legs and a decorative screen.

In addition to the thickness of the plumbing fixtures and the strength of the material, important parameters are:

• temperature resistance;
• equipment configuration;
• number of supports.

From a load point of view, corner models can withstand more weight than standard shaped structures.

Types of acrylic bathtubs and design features of models

Whether an acrylic bathtub is durable depends on the number of legs on which it is installed. The lion's share of the load falls on the supports, which are located under the bottom. That is, the more support points, the more stable the entire structure.

As a rule, plumbing fixtures come with 6 to 12 legs. If you have the opportunity, opt for equipment with a large number of supports. Then the load created on the legs will be insignificant.

You also need to consider what temperature the acrylic bathtub can withstand. Standard plumbing easily tolerates water temperatures of 80 degrees. Of course, if you throw a ladle of boiling water into the bath, nothing will happen to the coating. But if you pour a bucket of water, bubbles will appear on the surface that can no longer be gotten rid of.

It is not recommended to use water with a temperature above 65 degrees.

Pros and cons of low weight

An acrylic bathtub has the following advantages:

1. No movers are required for delivery. A product of any size can be lifted to the floor by 2 untrained people, so the owner will only need to invite one of the neighbors or relatives to help.
2. You can install it yourself. No assistants are needed to move or turn over a bowl weighing 20-50 kg.
3. It is possible to install the bowl on a wooden interfloor ceiling. These are found in cottages and country houses.

Flaws:

1. Low strength. It is the downside of light weight. An acrylic bathtub requires delicate handling and lasts less than a steel or cast iron one. Do not use abrasive or acidic detergents.
2. Instability. Without fastening to the wall, an empty product will tip over if you sit on it or lean on the side. Also, the bathtub may turn over after filling with water if the frame or legs were assembled incorrectly.
3. Temperature limitation. Light plastic softens when heated, so you should not pour water hotter than +70...+80°C.

The service life of a worn bowl can be extended. To do this, the inside is coated with liquid acrylic. After curing, the product looks like new.

Where can I buy

The Olive House online store offers an assortment of acrylic and plastic jars. The plastic dessert vase from the love series from the Italian brand Guzzini is available in different colors. Hot Stuff's large, minimalist plastic food storage jars with spoon are perfect for coffee and corn flakes. The transparent acrylic jar for bulk products Cilio has a yoke lock, an airtight lid and retains the contents well.

It is easy to buy acrylic containers and plastic jars for bulk products in Moscow and other cities in our store. The site has a convenient filter system that allows you to sort items. All you have to do is choose and add to cart. Delivery in the capital and St. Petersburg is carried out by courier. Order pickup points are open throughout Russia; you can also pick up goods at the post office.