DIY wooden chandelier: photos, drawings, step-by-step instructions, video

What you need to make a wooden chandelier with your own hands

First you need to fully think through the design of the future wooden chandelier. It is important that it fits harmoniously into the overall interior of the room. For apartments with high ceilings, massive and complex structures with additional decor are suitable. In small rooms, a large chandelier will visually hide the space and attract too much attention. For low ceilings and small rooms, more laconic models are needed.

The color scheme plays a big role. The wood should match the shade of the main furniture (cabinets, dining table) or one of the walls in the room. To do this, you need a special varnish-paint that will help correct the color of natural wood. In addition, wooden parts must be protected from temperature changes, dust and other unfavorable factors, so it is important to purchase high-quality varnish.

To assemble a wooden chandelier with your own hands, you need at least minimal skills in working with wood. You need to know how to properly cut wood, sand and connect parts together.

What tools may be needed when working on a wooden chandelier:

drill;
screwdriver;
screwdrivers;
long and short ruler;
manual or electric jigsaw;
hacksaw;
markers and pencils for marking;
sandpaper or sanding machine.

You also need to purchase wires, lamp sockets, the lamps themselves and special mounts. To decorate a homemade chandelier, you may need metal shades, chains, and glass. Wood does not combine with porcelain and thin plastic.

Drawings of wooden chandeliers

The first step in the process of making a wooden chandelier with your own hands should be a drawing. This step will help you build the desired model correctly. You need to calculate all the dimensions, think about the placement of lamps and mounting to the ceiling. Below are several ready-made drawings from which you can assemble an original lighting fixture.

A simple model consisting of 1 wooden board and three lampshades, hooks for a chain are fixed on the reverse side at equal distances. A chandelier made of 3 boards, all elements are connected to each other with small nails and rope. The design of a wooden lampshade in the form of a box is complex at first glance, but the details for production is very simple

Below are drawings of plywood chandeliers. All details can be printed on thick paper and transferred to the material, then cut out with a jigsaw. The sizes can be any. The structures are assembled without glue or screws; the elements are simply inserted into the grooves.

A chandelier with a cylindrical shape is good because you can place a material inside that scatters light (matte film, plexiglass). A lampshade reminiscent of a Chinese lantern is a good option for a high-tech interior. An unusual, but at the same time very simple teardrop-shaped shape is suitable for the style of "minimalism"

How to make a chandelier from wood with your own hands

You can create various models of wooden chandeliers yourself. Suitable materials include branches, boards, thin slats and plywood. Some lighting fixtures will require metal parts to strengthen and decorate them. They can be purchased at construction stores. Below are detailed descriptions of popular chandeliers suitable for different interior styles.

Simple homemade wooden chandelier

This model is suitable for high ceilings and spacious rooms. It can be placed above the kitchen countertop in a studio apartment or above the bar counter in a cafe.

An easy-to-make option - a chandelier made from cutting boards

To work you will need:

thick and wide pine boards;
block with a cross section of 7×7 cm;
6 sockets and lamps;
2.5 m of fabric-braided wire;
clear varnish for coating;
hacksaw;
screwdriver;
Forstner drill;
sandpaper;
plane;
grinder with a cleaning disc;
gas-burner.

Detailed instructions:

Trim the block with a plane so that its surface becomes smooth. Saw with a hacksaw into equal cubes, which need to be sanded with sandpaper, removing all irregularities and burrs. Find the middle on one side and put a mark.
Using a Forstner drill, the diameter of which must correspond to the size of the cartridge, make holes, focusing on the marks.
Carefully burn each cube with a gas burner so that the veins of the wood change color.
Insert cartridges into the holes, having previously connected them to the wire. The length of the cords should vary so that the lamps end up hanging at different heights.
Now you need to treat the surface of the board. If it is too uneven, then you should go over it with a plane. Using a grinder, process the edges, giving them a smooth, rounded shape.
Sand small burrs and irregularities with sandpaper. Then take a torch and burn the surface of the board from the front side.
Apply varnish to all parts and let it dry. Drill holes in the board for each wire.
All wires with cubes and cartridges must be installed in their places.

Important! The chandelier is attached to the ceiling using a drill, screwdriver and self-tapping screws. All that remains is to connect the wiring and screw in the lamps.

DIY antique wood chandelier

To enhance the effect of old wood, the boards are coated with a darker varnish. The lampshades are painted black, and a decorative layer of gold paint is applied on top, which will imitate cracks and abrasions.

This chandelier model is suitable for small rooms and will complement the country style interior.

What you will need:

pine board with a thickness of 3 cm;
3 lamps and 3 shades;
wires;
wood varnish;
5 m of chain with middle links;
hooks for fastening;
sandpaper;
electric jigsaw;
plane;
roulette;
hacksaw;
long ruler;
gas-burner.

Step-by-step manufacturing process:

You need to make marks with a ruler and pencil. Along these lines, cut the board into 3 equal parts with a hacksaw.
Fold the resulting parts into a triangle, as shown in the photo. The sides of the inner hole must be the same.
Plane the boards and sand them to remove large irregularities. Temporarily connect the parts together with self-tapping screws. Now you will need a round object, which you need to attach to each corner and trace with a pencil so as to get smooth edges.
Use a jigsaw to saw off the excess along the markings.
Unscrew the screws and burn each board with a gas torch.
All parts are fastened together again and varnished in several layers. Leave until completely dry.
Use a drill to make holes for the wires and install shades with lamps.

All that remains is to screw in 3 hooks from the back side and thread a chain folded in half through them. Now you can hang the product from the ceiling and connect it.

DIY chandelier made from tree branches

Such lamps look good in wooden houses, where the color of the wood is the main part of the interior. Making this chandelier model with your own hands is very simple.

One of the simplest and most original ways to decorate a ceiling is a chandelier made from dry branches.

What you will need:

a thick branch of an unusual shape;
sandpaper;
hand jigsaw;
wood varnish;
4 sockets and 4 lamps;
wires;
chain and hooks for fastening.

Use a hand jigsaw to cut off all the thin edges of the branches. Use sandpaper to remove the bark and coat the driftwood with varnish. Screw in the hooks and secure the chain. Wind the wires with the lamps so that the sockets are at approximately the same height. Hang the lamp in place.

Advice! To work, you need fresh driftwood so that the wood is damp; dry branches are not suitable. They may burst when screwing in the fastening hooks.

DIY wooden chandelier wheel

Wheel chandeliers were popular among the British in the 40s. Therefore, we can call this model “retro”.

The wheel-shaped lamp is more complex in design than previous models

What tools and materials are needed:

9 pine boards 20 cm wide, 5-7 cm thick;
8 slats 3-5 cm thick;
plywood sheet;
aluminum sheet;
chain 2 m, 4 hooks;
short screws;
decorative nails;
Sander;
sandpaper;
hammer;
screwdriver;
electric jigsaw;
drill;
2 crowns for wood of different diameters;
metal scissors;
wood glue;
wood varnish;
wires;
4 sockets and lamps;
hacksaw or electric saw.

Algorithm:

The wheel is assembled from 8 boards. The edge of each of them must be cut at an angle, as shown in the photo.
All ends are coated with glue and connected to each other to obtain an octagonal figure. When the glue dries, to strengthen the structure, you need to screw in short self-tapping screws at an angle, deeply deepening the caps.
Now you need to cut the corners and make the wheel round.
On a sheet of plywood, draw 2 circles slightly smaller than the diameter of the chandelier. You need to place them so that you get a ring, that is, 1 circle will be 2-3 cm larger than the other. The ring is cut out with a jigsaw.
All parts are sanded by machine.
The ring is coated with glue and placed on top of the wheel. For reliability, screw in short screws in 3-4 places.
2 circles are cut out of the last pine board using a special crown.
The wheels are ground and 1 of them is placed in the center of the wheel.
Now you need to measure the distance between the inner edges of the wheel and the circle and cut 8 slats according to the result. Sand each of them and secure it by lubricating the ends with glue and screwing long screws into the sides of the chandelier. Then use short screws to connect the slats to the circle.
Use a second circle to close the junction of the slats with the middle. Using a smaller diameter bit, cut out 1 more circle and sand it with sandpaper. Turn the wheel with the plywood ring facing down. Make holes in the middle of the small and large circle and plan out the chop. Fix it with glue inside the small circle and insert it into the large one, having previously lubricated the tip with glue.
Coat the product with varnish on all sides.
Using scissors, cut a strip of metal equal in length to the diameter of the wheel. Using a hammer and decorative nails, secure the aluminum strip in a circle as shown in the photo.
Install lamp sockets between the slats and connect the wires.

Screw the hooks to the plywood ring and stretch the chain.
All that remains is to insert the lamps and connect the chandelier to the wiring. To cut corners, you need to draw precise markings in a circle. The figure is placed on a wooden table or on the floor. Drive a nail in the center. A thread and a pencil are tied to it at the distance where the line should go. Having pulled the thread, draw an even circle with a pencil.

DIY chandelier made of wooden beads

A homemade chandelier made of wooden beads is a universal model. To make it harmonize with the interior, it is enough to choose the right color of the material.

The lamp and socket are mounted separately on the ceiling; you need to leave 25-30 cm of the cord so that the base hangs down

What you will need:

wire basket or flower pot;
wooden beads 700 pcs. large, 130 pcs. medium in size;
strong cotton thread;
decorative cord;
scissors.

How to assemble such a chandelier:

Cut 40 cm of thread and string 1 smaller bead, placing it in the middle. Fold the thread in half and string 8 more beads, but larger ones.
Tie the threads with beads to the frame, starting from the bottom.
Using a decorative cord, secure the chandelier to the ceiling.

Advice! Before work, the flowerpot or basket should be painted with spray paint in the desired color, because the wire parts will be clearly visible. The decorative cord should be the same color as the frame.

DIY metal and wood chandelier

Another simple chandelier made of wood that is easy to make with your own hands.

Metal elements with cartridges can be purchased at hardware stores. Most often, such parts are used for wall lamps.

The photo below shows a very simple option: a wooden block was hewn and burned with a torch, then varnished. Ready-made lamp holders were screwed onto the sides. 2 hooks were secured on top and a chain was pulled through. For an antique effect, we purchased and screwed in flame-shaped lamps.

To make a chandelier, you just need to use your imagination

Advice! Depending on the shape and texture of the metal, wooden lamps with this decor will suit different styles, for example, “loft”, “high-tech” or “modern”.

DIY chandelier made of wooden slats

What you need for work:

saw;
drill;
sandpaper;
feather drill for glass 6 mm;
wood glue;
8 pcs. slats 20*40 mm;
4 bolts with a diameter of 6 mm and a length of 10 cm;
4 cap nuts and 4 regular ones;
window glass 48×48 cm;
transparent self-adhesive wallpaper with a pattern;
two cartridges with fastenings;
wires;
connection terminals;
4 corners 3x3 cm.

Step-by-step instruction:

All slats need to be cut so that they are the same length. Use sandpaper to sand and round the edges.
Using glue, assemble 2 identical frames, as shown in the photo. Each edge protrudes 10 cm.
Place the frames on top of each other and drill holes for the bolts.
Then varnish each frame.
When the coating dries, assemble the structure. Secure the bolts with nuts on the reverse side.
On both sides, retreat 5 cm from each edge and screw the corners. They are needed to attach the chandelier to the ceiling.
Using a glass cutter, cut a square of window glass 48x48 cm.
Place the glass on top of the wooden frame on the side where the bolts are. Mark the locations for the holes with a marker and drill them with a special feather drill. Then stick a decorative film on the front side of the glass, then place it on the protruding bolts and secure with cap nuts.
To make sure, screw 2 lamps with sockets in the corners and connect the wires.
To hang a chandelier from the ceiling, you need to remove the glass. When the screws are screwed in, return the glass.

Advice! In order for the film to stick evenly, it should be applied gradually. A plastic card can be used to expel air bubbles and smooth out small wrinkles.

DIY loft chandelier made of wood

It is not difficult to assemble such a model. You will need to cut a 15×15 wooden beam into 4 equal parts. Use a chisel to remove some of the wood from the bottom edges. Lightly sand the resulting potholes and burn them with a torch. Cover the bars with varnish.

The loft style is rough and masculine, so a wooden chandelier must meet these standards

Make 2 holes on the side at equal distances and connect the wooden blocks with scraps of metal pipe. On top, obliquely screw a piece of varnished plywood with a hole in the middle, through which a lamp socket and a thick fabric-braided wire will be threaded.

DIY wooden LED chandelier

First, the wooden boards are cut, sanded well and varnished. At the bottom, using a chisel and hammer or on a machine, make a 2-3 cm indentation. A through hole is drilled across the board from the edge and the soldered wires are brought up. Tape is glued into the recess and covered with frosted glass, which diffuses light well.

To assemble a similar chandelier from wood, you need soldering skills; long wires and a special block are soldered to the LED strips, which will regulate the electrical voltage

You can watch how to make another model of LED chandelier from wood with your own hands in this video:

Other types of wooden chandeliers

The easiest to manufacture and assemble is a pendant lamp made from driftwood. It is also called a branch chandelier. The basis is one large piece of driftwood, which is decorated with elegant light bulbs. They look like fruits or are mounted on driftwood in simulated candlesticks.

The main difficulty is how to disguise the wiring in the snag.

Stages of work

To assemble, trim the selected large piece of driftwood from the bark, dry it and sand it with sandpaper.
Choose energy-saving light bulbs that are suitable in size and will not cause the chandelier to heat up.
Make thin cuts in the driftwood using a drill. You will place the wiring in them, and then mask the holes with putty.
Install the lamps on the branches of the structure. They can either hang freely from branches or be placed on top of lampshades.
Such a branch chandelier can be decorated with interesting wooden toys, Soviet-era Christmas tree decorations, antique beads, chains, rhinestones - anything.
The structure is attached to the ceiling with screws or a chain.

An interesting option is a wheel-shaped chandelier. To make this type of lamp, you need to make a wheel, which will determine the diameter of the supporting base. The wheel must include at least 2-3 layers of sheets connected with self-tapping screws. Having marked the center and rim of the wheel, carefully cut it out.

The structure is assembled using copper wire, ceramic lamp sockets and bolts for hanging the chandelier. Place the wiring between the sheets or on top of the rim.

Source

Photos of wooden chandeliers

In the photographs below you can see several more models of chandeliers and lamps made of wood that you can make with your own hands.

A simple and laconic chandelier made from a wooden block is perfect as decor in a cafe or for a home kitchen. An unusually shaped chandelier made from wooden slats will fit into an interior in the style of “high-tech” or “minimalism”

A lamp made of wood and rope will create a cozy and warm atmosphere. The cord is hidden inside a thick rope. It is important that the lamps do not get too hot.

Before assembly, the rope of the future chandelier should be treated in a special liquid. An original chandelier made of wooden beads will look good in a classic interior and in the Baroque style. A common option is a chandelier made of wooden slats in the style of “minimalism.” A sophisticated model of a wooden chandelier made of plywood is suitable for bedrooms To work on this chandelier, wooden driftwood of an unusual shape was selected, they resemble elk antlers. You don’t have to figure out how to screw in a base and hide the wires inside a wooden structure, you can take an ordinary lamp and complement its design with a small wooden element

Stylish and creative solutions for wooden lamps

Wall lamps made of wood, especially if they are made by hand, can add a special homely atmosphere to the living room. The most optimal solution is a unique composition of a water pump housing and a wooden sconce.

This form of lighting may be to the taste of many, especially those who are partial to original products.

Antique lamps made from parts of dried trees are no less original. If this unique product is framed with small crystal pieces and, in addition, varnished, then such a lamp can be used as a kind of night light.

If you need a wall-mounted floor lamp for a child’s room, you can use your imagination and make it from several LED lamps and medium-sized plywood or wood carved in the shape of your favorite fairy-tale character. Such lighting will definitely please the child, especially at night when the light rays are scattered throughout the room.

When you want to add a dose of creativity, you can use:

Garland.
Pine branches.
Holder for cornice.

If you make such an original lamp from wood with your own hands, it will become possible to use it for other purposes. For example, due to the fact that the light bulbs do not heat up, you can hang scarves and other things on the branches, that is, use them as a kind of hanger.

There are actually a great many options for execution. The only thing that may be required to create an original wooden ceiling lamp or wall sconce is imagination.

Even the most ordinary branch that has fallen from a tree can become unique, especially when combined with old unnecessary things that have been stored in the attic or closet for years.