Assembling an Ikea kitchen with connecting appliances: useful information
We continue to tell all readers about all the nuances of assembling kitchen furniture. As those who read sborkakuhni.ru have already understood in the kitchen, and throughout the house, during renovation there is no need to do anything spontaneously. First, it’s better to think about everything, plan, and only then do it.
It is necessary to decide in advance on the placement of household appliances and communications
If you are planning to renovate your kitchen, then you should not rush to immediately purchase or order furniture, and even more so, with assembling and connecting household appliances. Even if this is assembling an Ikea kitchen with connecting appliances, before this you should, first of all, decide on the placement of communications in accordance with the plan. Plumbing, sewerage and electricity are planned in advance, according to the location of household appliances. There are several tips to help you install outlets and plumbing safely and conveniently.
A few rules before assembling an Ikea kitchen
So, to begin with, before assembling the Ikea kitchen with connecting the appliances, you need to find out where it will stand in order to properly conduct communications. There are several rules for this.
The stove and sink should not be installed close, but at the same time not too far away. It is best to place a bedside table between them, which will serve as a work surface.
To correctly place the stove, you should take into account the location of the ventilation. After all, the hood must be connected to the ventilation hole. This is often done using a corrugated pipe, less often a plastic box is used. The dish dryer is installed above the sink.
Placement of sockets for connecting household appliances
After determining the arrangement of kitchen furniture, you need to plan the placement of sockets. A separate oven is located very close to the wall itself. Therefore, under no circumstances should electrical communications be placed behind it; this may be unsafe. The sockets are located under the oven at a height of 10 cm.
For the stove you need to choose a powerful outlet. It should also not be placed at the back. You should choose a place above the adjacent work surface next to the stove. It is better to place the socket at a height of 65 cm from the floor to make it convenient to pull it out; it is possible to make a hole in the back wall of the bedside table. Do not forget that you will need two sockets: one for the stove, the other for the oven.
Accordingly, it is necessary to provide an outlet for the hood. It is better to place it at a height of 30 cm above the shelves. If the hood is backlit, then a socket is also placed next to it.
When assembling an Ikea kitchen with the connection of appliances for a dishwasher, the electrical outlet can be positioned in the same way as for the stove. It is installed on the right or left behind the work surface. But this is not the only thing that is required for this type of household appliance. A water supply should be provided. It is installed on the other side of the outlet. This solution will protect the kitchen from short circuits.
Results
The pipeline to the kitchen sink is placed at the optimal height, which is 45 cm from the floor. The supply, drain and sockets for the dishwasher should be done in the same way as for the sink. As you can see, assembling an Ikea kitchen with connecting appliances is a difficult process that requires a thorough study of the room and planning the placement of kitchen furniture. For those who have never done this, it can take several days, and this does not take into account the kitchen assembly itself. It seems that everything is simple, there are instructions for kitchen furniture, just figure out where the sockets will be, etc. and collect. In practice, everything is much more complicated for many residents in Moscow and the Moscow region. Therefore, it is better to immediately order professional assembly of an Ikea kitchen, rather than complicate everything and waste your time.
How to choose and install a dishwasher outlet
When you have a dishwasher in your kitchen, you can breathe a sigh of relief - the dishes will be washed quickly. Even after the feast there is nothing to worry about. Good, smart appliances like a dishwasher, for example, make life carefree. But sometimes in the kitchen there is no suitable outlet. Is it safe to connect via an extension cord? If there is an outlet, is it suitable? The plug of modern household appliances and their power always raise suspicions.
Dishwasher socket
Is it possible to make an outlet behind the dishwasher?
When you have a dishwasher in your kitchen, you can breathe a sigh of relief - the dishes will be washed quickly. Even after the feast there is nothing to worry about. Good, smart appliances like a dishwasher, for example, make life carefree. But sometimes in the kitchen there is no suitable outlet. Is it safe to connect via an extension cord? If there is an outlet, is it suitable? The plug of modern household appliances and their power always raise suspicions.
Dishwasher socket
Extension cord is dangerous
It is not safe to use an extension cord in the kitchen: there is a risk of moisture getting in. You can forget about this if you constantly use it at work, in the living room, bedroom, corridor, balcony. Often it has to be used in the kitchen. However, it should be placed here with extreme caution, unless absolutely necessary.
It is prohibited to place it in such a way as on a convenient sink stand. The sink is definitely not suitable for this. It is also not allowed to place it in a secluded, unsightly place under plastic water pipes. It can heat up when it breaks down and damage the pipes, opening the access of current to the water.
It is strictly prohibited to place the extension cord under the tap, even the most reliable one, next to gas appliances (closer than half a meter).
Dishwasher socket
This must be a high-quality adapter without fail. When purchasing a housing, the thickness of the wire, the plug should be appreciated by the buyer. If the parts of the case are poorly fixed, the wire is thin, and the plug is made of rubber with obvious defects, it is wise to look for another option. And without knowing the names of trademarks, with a visual inspection you can form the correct opinion about the product being offered.
A dishwasher is a powerful household appliance that can operate unattended. Its installation is an important process that requires reading the instructions from the manufacturer. Most often, the manufacturer indicates that installation using an extension cord is possible. Another thing is that the extension cord wears out over time, increasing the likelihood of an accidental short circuit.
In this regard, it is better to use it in extreme cases where the equipment can work autonomously. The dishwasher is usually connected to other appliances. They consume energy unevenly. The extension cord may not be able to withstand the load of several devices, and there will be no one nearby at that moment. Sometimes people go to the store leaving their equipment on.
Thus, installing a dishwasher using an extension cord is still a risky undertaking.
Installation location
It is necessary to designate in advance the place where the equipment will be located and where to install the outlet for the dishwasher. The best connection option is to install a separate, new electrical wiring line, rather than replacing an old outlet, for example. It is very convenient and rational.
The load on the electrical network, insulating materials and conductors will be reduced due to proper current distribution. But if the wiring is in order, the socket is in doubt, then it is rational to replace it. Installing a dishwasher outlet will help reduce the risk of equipment damage when the plug is disconnected and more.
All work must be carried out in accordance with the norms and rules of the PUE, GOST, SP.
The height at which the socket should be located
The dishwasher socket is located at a height of 10 to 50 cm from the floor. The floor is the surface on which flammable objects often end up. The floor and baseboard may be made of flammable materials. So the floor and the outlet must be separated by a certain distance.
It is advisable to place the outlet out of the reach of children. A height of 10 cm is safe from the point of view of the likelihood of the baseboard catching fire. However, this height will not prevent the child from pulling the cord. The socket for the built-in dishwasher, of course, can be located at the lower limit.
This is good for built-in technology, but it's not all about it. Built-in appliances and a visible outlet are incompatible concepts. Built-in appliances imply the strict purpose of each outlet for one device. From this point of view, built-in technology loves counting. But not everyone will like it.
If a height of 50 cm is selected, a small child will not be able to turn off the equipment.
It is desirable that all sockets of equipment of one group are located on the same line around the perimeter. The same height makes each room an element of a single space. Different will be an interesting touch. It is convenient to install sockets on the same line if there are hanging cabinets and more. Photos with this design make a very pleasant impression. The height of the dishwasher outlet is determined by the characteristics of the room and furniture, so the permissible values vary, and the number of possible options is large.
Much depends on the length of the equipment cord. The dishwasher does not involve replacing the power cord, but rather relocating the outlet. But there’s nothing wrong with that; of course, the dishwasher must have the necessary functions, and not a wire of the required length.
Source: https://lemzspb.ru/mozhno-li-delat-rozetku-za-posudomoyechnoy-mashinoy/
