Hendershot generator detailed description of details

Performance history

The inventor of the device in question is considered to be the American physicist Lester Hendershot.
His generator was first presented to the general public in 1981 in Toronto, where at that time a congress was held on the energy of the gravitational field. Then it was reported that it works due to the presence of a magnetic field near the Earth. From this it follows that its location, as well as its orientation relative to the south and north poles, plays an important role. The inventor himself, Lestor Hendershot, did not live to see the congress. He died in 1961 (officially, he committed suicide).

New York TimesNew York Times (February 28, 1928): "Explains Magnet In Fuelless Motor"

Hendershot reports that turning the device in a west-east direction produces a rotating motion ~ Secret Magnetic Coil ~ The inventor states that the motor weighs 4 ounces per horsepower.

Slightly indignant at the way his fuelless engine has been misinterpreted in official communications from Detroit and Washington, Lester Hendershot said today that there is nothing mystical about the workings of his invention, that the energy that powers it is the same energy that moves the needle compass, and there is nothing mystical about it.

I advise you to read: The Law of Gradient, or how not to get lost on the path to Success?

The inventor explained that he had no goal of creating a fuel-free engine when he first became interested in aviation three years ago.

“I realized that the optimal development of aviation depended on the discovery or invention of a completely true and reliable compass,” he explained. “An ordinary magnetic compass does not point north accurately; it has errors almost anywhere on Earth. There is another compass, based on magnetic induction, it points exactly north. But it needs to be adjusted before every flight, and it’s not always reliable.”

“I discovered that with a pre-charged core I could create a magnetic field that would point exactly north, but I don’t yet know how to implement this in a device. I’ll work on it.”

“Continuing my experiments, I learned that by cutting the same line of magnetic force north and south, I could get an accurate north indicator, and by cutting the magnetic field from west to east, I could create a rotational motion.

Now I have an engine made according to this principle. It can rotate at a constant speed, which was specified during the design of the engine. You can set any speed you want. Such a reliable motor, with a constant speed, is very necessary for aviation.

Hendershot's main secret, as his friend Barr Pete says, is how he winds a magnet in a motor so that it begins to rotate in the opposite direction to the rotation of the Earth.

He says no heat is generated because the magnetic waves are cold and the engine only stops if the magnetic field has been broken. The magnet in the motor, he thinks, probably needs to be recharged every 2,000 hours of operation.

Mr. Hendershot claims that one of his engines is ready to be installed in an airplane. It weighs a little over four ounces per horsepower. While gas engines weigh two pounds for every horsepower.

Mr Hendershot says the altitude will not affect the efficiency of his engine. At the height that man was able to conquer, the magnetic influence of the Earth remains the same.

He said that the same principle that made his model work only if oriented north would be developed further to make a compass that was very accurate.

General information on creation and related processes

The first mention of this device dates back to the 1927-1930 range. According to available records, Hendershot received a usable device, the power of which was 200-300 watts. Then, for a short time, Lester was honored by the American press as a national hero. But soon the praise in his direction gives way to accusations of quackery and fraud.

At this time, the inventor himself is injured from electric current and no longer appears with his developments. According to his son, Mark Hendershot, his father received $25,000 in exchange for not disclosing information about the generator.

That's all. And let's move directly to the device. Are you interested in the Hendershot generator? Component wiring diagram? But before dealing with such issues, let's find out what is needed directly for the device itself.

Invention is the result of a dream

Hendershot made the first fuel-free engine for his son's toy airplane.

The invention of the fuelless engine, which was tested in Detroit, was the result of a dream by the inventor, Lester Jennings Hendershot, who lives near the railroad tracks in a town of 3,000 people 15 miles from Pittsburgh.

Although Hendershot is now returning from Selfridge Field and will not be home until tomorrow, his wife told us the general concept of the machine and how the model was constructed from spare parts from a classic radio that had been given to the inventor by his uncle.

Several years ago, the inventor dreamed of a device that would operate from “earth currents,” according to his wife, but he did not begin working on it until last November.

I advise you to read: How the gods opened the doors of temples

It was around this time that his 4-year-old son built a toy airplane and was upset that it didn't fly. Dad was puzzled by the problem and promised his son a plane that would work. The result of this was the invention of a fuel-free apparatus.

Necessary materials

So, you will need the following components:

1. A coil of enameled copper wire 0.95 millimeters in diameter and 50 meters long.
2. Two parts of copper insulated PVC wire, diameter – 1.5 millimeters, length – 18 meters. For the convenience of subsequent work, you can use wires with insulation of different colors.
3. Two non-polarized capacitors. Each of them must have a capacity of 500 microfarads.
4. 150 wooden rods, the diameter of which is 3 millimeters.
5. Four non-polarized capacitors. The capacity of each of them should be 1000 microfarads.
6. Two transformers with a ratio of 1:5, designed to operate with a voltage of 110-220 Volts.
7. One panel made of wood, plywood or chipboard, with sides 100/60 centimeters.
8. Copper wire with PVC insulation, length 10 meters, diameter 1 millimeter.
9. One rectangular steel bar, with parameters 10/0.5/2 centimeters.
10. Outdoor outlet rated for 110-220 Volts.
11. A sheet of cardboard, wood, plexiglass (but not metal) with sides 10 by 10 centimeters.
12. Two guide rails, which are used in furniture fittings (but without wheels).
13. Magnetic bar of rectangular or cylindrical shape. Diameter – 1.5 centimeters, length – 10 cm.
14. Two cylindrical steel bars. Length – 8 centimeters, diameter – 2 cm.

Required Tools

Materials alone are not enough. To simplify the production process, the following tools are needed:

• ruler (a length of 30 centimeters should be more than enough);
• a pair of pliers;
• permanent marker;
• pencil;
• flat and figured screwdrivers;
• insulating tape;
• drill;
• drill 3 mm;
• epoxy adhesive;
• sticky double-sided adhesive tape;
• ten self-tapping screws, the length of which is 2 centimeters;
• soldering gun;
• twelve screws, the length of which is 2 centimeters. Will be used for mounting capacitors;
• wrench;
• solder;
• flux;
• stationery knife.

To summarize, it is difficult not to note the simplicity of the set. Thanks to this, we can conclude that assembling the device is relatively easy. Before you start creating this device, we suggest you familiarize yourself with its advantages and disadvantages. Also presented to your attention are two schematic images on which the work will be carried out.

Schematic illustrations

There are two main images that claim to be true.
Their similarity should be noted. Therefore, if you wish, you can personally check the Hendershot generator. The scheme, does it work or is it another myth? The original version had a pair of coils containing capacitors. Transformers were used from radios. The coils were tuned to mutual resonance. This model only worked when it was oriented south from north. According to Hendershot himself, the amount of energy received was enough to power a small engine, which was confirmed by an experiment with a toy airplane.

Let's start assembly

We begin to manufacture the Hendershot generator.
The circuit can be implemented with your own hands without problems, but for this you need to follow the instructions. First, take the panel. Draw two circles on it, the diameter of which will be 100 millimeters. The distance between their centers should be 50 centimeters. If you don’t understand how and what to implement, look at the diagram. These parameters are indicated in its upper right corner. We mark points on the circles at equal intervals. Then they need to be drilled out with a 3 mm drill. Insert wooden rods into them. They should rise 70 millimeters. If this parameter is exceeded, it must be trimmed. Then carefully straighten the wooden sticks after cutting.

Take a wire with a cross-section of 1.5 millimeters by 2, and start laying it between them. It is necessary to make 12 turns for each coil. Then we take a wire 2.5 millimeters by 2. It also needs to be laid 12 turns per coil.

We have two types with different color designations. Each type of wire must be wound 6 times. Remember that the coils must have the same number of turns. Also remember to leave 50-60 millimeters at the top so that you can connect to them. During assembly, it is advisable to lightly press the coils with a wooden ruler so that they fit correctly.

New power generators

> Generators > New energy generators

New energy generators - what is it about? Currently, it is still profitable to obtain energy from oil, gas and coal. Using hydroelectric power is labor-intensive and costly, and nuclear power is dangerous. Natural fuel reserves will soon come to an end; it is imperative to look for new sources of alternative and free energy. The CE designation refers to independent energy from the environment. The picture below shows Nikola Tesla's famous free energy generator in action.

Nikola Tesla Free Energy Generator

For the development of any civilization, a continuous increase in replenishable free energy is necessary; its new sources are constantly being sought. To do this, it is necessary to create self-powered generators that use the following phenomena:

static electricity; features of the action of the magnetic field created by permanent magnets (blocking generators); heat extraction by mechanical heating; use of earth and space resources; heat pumps; CE of water, wind and the earth's magnetic field; creation of biogas plants; obtaining hydrogen fuel from water; CE of the sun.

What previously seemed like science fiction is now finding industrial application, although the principle of obtaining free energy is costly. New factory-made devices have high prices and not all generators live up to expectations. Therefore, it is advisable to reduce some of the costs by making the installations yourself.

Peltier elements

Initially, the elements found application in military and space technology, which required a not very powerful device that was also subject to vibrations and shaking. Now new devices are widely used in everyday life, most often for cooling electronic equipment and in the manufacture of small portable refrigerators. Refrigerators with modules can be made with your own hands, but they are also available for sale.

The Peltier effect occurs when a constant voltage is applied to different surfaces of a semiconductor wafer: one side heats up and the other cools. The process is reversible: when a temperature difference is maintained between the sides of the plate, an electric current flows between them and the device acts as a generator. The diagram of its structure is shown in the figure below.

• 
  Fuel-free generators or how we are being deceived

Generator, motor-generator, self-powered

Thermoelectric generator (Peltier element)

This makes it possible to use a Peltier element as an electricity generator. Powerful installations here will be too expensive, but as independent chargers when assembled with your own hands for mobile phones, they are just right.

The advantage of a thermoelectric generator is the absence of moving parts, which usually wear out and require maintenance. The disadvantage is low productivity, since while one side is working, the other side has to dissipate energy into the external environment.

Evaporation pumps

The operating principle of a heat pump is based on collecting and increasing heat potential through a reverse Carnot cycle. The system is filled with freon and consists of the following parts:

• external and internal circuits with coolant;
• compressor;
• evaporator;
• capacitor.

Thermal energy is taken from the environment. It is conditionally free, since the temperature of water, air and soil is always different

Its constant renewal is important. The operating principle of a heat generator can be simulated by installing a heat exchanger inside a regular refrigerator through which warm water is pumped

The generator will work to cool it, and the heat will be released in the radiator on the rear wall of the refrigerator. Using this method, a heat pump works to heat a house, taking heat from the environment and transferring it indoors. Sources of free thermal energy can be technical or ground water, a reservoir, outside air, or soil.

The figure below schematically shows a home heating installation using a heat pump.

• 
  Tesla coil: simple manufacturing instructions from a specialist, at home!

Heat pump operation diagram

The heat input comes from the external circuit (blue), through which the coolant circulates with the selection of heat (free energy) from the surrounding space, for example, from a reservoir. In the evaporator, the coolant transfers heat (4-70C) to the refrigerant circulating through the heat pump, the boiling point of which is only +100C.

The refrigerant boils and turns into a gaseous state. The coolant, having given up some of the heat, is used for heating, and the gaseous refrigerant is supplied to the compressor, where it is compressed and its temperature rises significantly.

Placing capacitors

Now we need 500 microfarad devices. We glue double-sided adhesive tape to their bottom. It is necessary to place the capacitors in the center of the made coils. After the 500 microfarad devices are placed, the same should be done with the 1000 microfarad devices. Two capacitors are placed on the panel on the outside of the coils. The devices are non-electrolytic and therefore have a significant size. Therefore, it would be a good idea to think about their compact placement. We install the remaining components of the circuit. Transformers must be fixed to the panel.

Installation of the structure

Now we are approaching the end of creation, and soon it will be possible to check the Hendershot generator. Free energy, DIY instructions, a diagram - all this can be obtained and done by devoting a few hours to the production process. All elements are connected by soldering. Also pay special attention to the accuracy of assembly. Try to adhere to the specified scheme as much as possible.

Also, be careful not to confuse the end and beginning of the winding when connecting coils and capacitors. Also check that the installation is secure. Then you can connect the socket. To do this, you need to install it on the panel in a place convenient for you. All exposed conductors must be wrapped with insulating tape. Heat shrink tubing can be used for this purpose. In this case, safety must be put first, because the price for violating it is your health and even life. Therefore, do not skimp on insulating material.

Tesla generator: how it works, how to make a fuel-free device with your own hands at 220V - diagram

The inventions of the famous Serbian scientist Nikola Tesla were far ahead of the development of science in the field of alternative energy sources. He is considered the man who gave electricity to people.

The devices he created, including an electric motor, a fuel-free generator, a resonant transformer and other discoveries created a launching pad for the transition to a new stage of industrial development. The real dream of the genius was the idea of ​​​​giving people free electricity.

The Tesla generator, according to the inventor, could transmit electrical energy wirelessly over long distances.

What it is

In fact, a fuel-free electric generator is a perpetual motion machine that does not require additional resources to operate. Obtaining free energy is the dream of humanity, which will become the impetus for the reconstruction of social relations of society and will lead to an evolutionary leap in development.

Ether Tesla

The idea of ​​obtaining alternative energy could be realized by a Tesla generator, which draws energy from the ether.

Important. There is a lot of debate about whether ether exists

According to N. Tesla, it is the lightest gas, made up of almost imperceptibly small particles. They move at unimaginable speed. N.

Tesla believed that each type of wave operates at its own frequency and in a specific environment. Ether is a medium for almost instantaneous transmission of electromagnetic waves.

Its field is capable of transmitting electromagnetic and gravitational waves over enormous distances.

Operating principle of a fuel-free generator

Ether is a source of unlimited energy. Electromagnetic waves permeate the atmosphere around us. The earth has a low energy potential, while light and sun rays have a high energy potential.

If you install a trap between positively charged light particles and the negatively charged potential of the ground, you can generate an electric current. In this chain you need to insert a storage capacitor, for example, a lithium battery.

It will capture and accumulate energy. When a power source is connected to the capacitor, the storage device will be discharged.

The main components of N. Tesla's fuel-free generator consist of:

1. Receiver located above the ground.
2. Storage capacitor.
3. Grounding.

Note! A fuel-free electric generator is based on obtaining electric current from the ether. Use two differently charged potentials

The earth is a resource of negative electrons, light waves, including those from the sun, are positive. One of the electrodes is grounded, the other is displayed on a shielded screen.

A capacitor is installed in the circuit as a storage device, which accumulates energy.

Scheme on how to make a fuel-free Tesla generator with your own hands

We regulate

The device itself is already assembled. Let's work with the magnetic resonator block. You can select a lamp as the load. We connect it to the device and begin to move the coils towards the magnet to get maximum operating efficiency. This can be judged by the intensity of the lamp's glow. As soon as the maximum effect is obtained, stop the adjustment. During this process, do not touch the iron rods on which the coils are wound. If you need to work with them, use dielectric material.

Reviews

If everything was done correctly, then you can observe a very good level of power. So, some craftsmen even boast of 4-5 kilowatt designs. This is more than enough to ensure the operation of quite a large amount of equipment. Although it should be noted that the design in such cases will be seriously improved. What do they say about this Hendershot generator? The scheme and reviews about it deserve attention. It is suitable for those who are beginning to study fuel-free energy sources in practice. Last but not least, such reviews can be heard due to the relative simplicity of the design and its assembly process.

What do fuel-free generator manufacturers promise?

On the Internet you can find various sites that offer to buy BTG, and for quite a lot of money (on average - 12 thousand rubles). Moreover, each seller explains the principle of operation of the mechanism in his own way.

Some say that a fuel-free generator operates on some kind of “earth energy”, for others the source is ether, and others talk about static energy, which does not obey the known laws of physics, but is quite real.

IMPORTANT! The theory of the ether was relevant until the beginning of the twentieth century, until in 1910 Einstein refuted it in his scientific article “The Principle of Relativity and Its Consequences in Modern Physics.” In fact, BTG is a beautiful invention, and similar devices do not exist in nature

In fact, BTG is a beautiful invention, and similar devices do not exist in nature.

However, for those who are new to physics, the explanations about the ether and “earth energy” are quite enough to buy an expensive but useless generator.

Is it possible to make a fuel-free generator with your own hands?

If you are still in doubt, try assembling such a generator yourself. There are many different schemes on the Internet for collecting BTG at home. Among them, there were two fairly simple methods: wet (or oil) and dry.

Oil method of collecting BTG

You will need:

• AC transformer – necessary to create constant current signals;
• Charger – ensures uninterrupted operation of the assembled device;
• Battery (or regular battery) – helps accumulate and conserve energy;
• Power amplifier – will increase the current supply;

What is a lithium ion battery - device and types

The transformer must be connected first to the battery and then to the power amplifier. Now a charger is connected to this design, and the portable BTG is ready!

Dry method

You will need:

• Transformer;
• Generator prototype;
• Undamped conductors;
• Dynatron;
• Welding.

Connect the transformer to the generator prototype using undamped conductors. Use welding for this. A dynatron is needed to control the operation of the finished device. Such a generator should work for about 3 years.

The success and effectiveness of these designs largely depends on your luck. You will also need it to find all the necessary elements specified in the instructions. But you probably already guessed that all this is unlikely to work.

Adams generator

In 1967, a patent was received for the production of this generator. The BTG turned out to be working, but the power it produced was so small that it would hardly be possible to provide energy to even a small room with its help.

But scammers don't care. Therefore, on the Internet you can find sites selling the Adams generator. But why spend money on a device that won’t help you save money?